Table of Contents
Advertisement
System Panel Header
(9-pin PANEL1)
(see p.8 No. 15)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.8 No. 16)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.8 No. 19)
CPU Fan Connector
(3-pin CPU_FAN1)
(see p.8 No. 5)
ATX Power Connector
(20-pin ATXPWR1)
(see p.8 No. 4)
ATX 12V Power Connector
(4-pin ATX12V1)
(see p.8 No. 2)
Game Port Header
(15-pin GAME1)
(see p.8 No. 21)
PLED+
This header accommodates
PLED-
PWRBTN#
several system front panel
GND
functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
Please connect the chassis
1
speaker to this header.
SPEAKER
DUMMY
DUMMY
+5V
Please connect a chassis fan
cable to this connector and
GND
match the black wire to the
+12V
CHA_FAN_SPEED
ground pin.
Please connect the CPU fan
CPU_FAN_SPEED
cable to this connector and
+12V
GND
match the black wire to the
ground pin.
Please connect an ATX power
supply to this connector.
Please note that it is necessary
to connect a power supply with
ATX 12V plug to this connector.
Failing to do so will cause power
up failure.
Connect a Game cable to this
+5V
JBB1
JBX
header if the Game port bracket
MIDI_OUT
JBY
is installed.
JBB2
MIDI_IN
1
+5V
JAB2
JAY
GND
GND
JAX
JAB1
+5V
1 8
1 8
1 8
1 8
1 8
Advertisement
Table of Contents
