ASROCK K7VM3 Installation Manual page 5

USB 2.0: 4 default USB 2.0 ports and 1 extra set of header for two
additional USB 2.0 ports upgrade (see CAUTION 3)
TM
ASRock I/O : PS/2: 1 keyboard port / 1 mouse port;
1 RJ 45 port; 4 rear default USB 2.0 ports;
1 VGA port; 1 parallel port: ECP/EPP support;
Audio Jack: Line Out / Line In / Microphone + Game port
BIOS: AMI legal BIOS; Supports "Plug and Play";
ACPI 1.1 compliance wake up events;
SMBIOS 2.3.1 support;
CPU frequency stepless control
(only for advanced users' reference, see CAUTION 4)
OS: Microsoft
CAUTION!
1. While CPU overheat is detected, the system will automatically shutdown.
Please check if the CPU fan on the motherboard functions properly before
you resume the system. To improve heat dissipation, remember to spray
thermal grease between the CPU and the heatsink when you install the PC
system.
2. Do NOT use a 3.3V AGP card on K7VM3's AGP slot!
It may cause permanent damage!
3. Power Management for USB 2.0 works fine under Microsoft
SP1 / 2000 SP4. It may not work properly under Microsoft
ME. Please refer to Microsoft
http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx
4. Although K7VM3 offers stepless control, it is not recommended to perform
over clocking. When the CPU frequency of K7VM3 is set to perform over
clocking, other clocks, such as PCI clock, AGP clock, and Memory clock
will also be overclocked proportionally. Frequencies other than the
recommended CPU bus frequencies may cause the instability of the
system or damage the CPU.
ASRock K7VM3 Motherboard
® ®
Windows 98 SE / ME / 2000 / XP compliant
®
official document at
® ®
Windows XP
® ®
Windows 98/
5 5 5 5 5