ASROCK K10N7SLI User Manual page 27

eSATAII Connector
(eSATAII_TOP: see p.12, No. 37)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Headers
(9-pin USB8_9)
(see p.12 No. 18)
(9-pin USB6_7)
(see p.12 No. 19)
Infrared Module Header
(5-pin IR1)
(see p.12 No. 26)
This eSATAII connector
supports SATA data cable for
external SATAII function. The
current eSATAII interface
allows up to 3.0 Gb/s data
transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
You can also use the SATA data
cable to connect SATAII_6
(PORT5) connector and eSATAII
connector.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to the
power supply
connector of the power supply.
Besides six default USB 2.0
USB_PWR
P-9
ports on the I/O panel, there are
P+9
GND
DUMMY
two USB 2.0 headers on this
motherboard. Each USB 2.0
1
GND
header can support two USB
P+8
P-8
USB_PWR
2.0 ports.
USB_PWR
P-7
P+7
GND
DUMMY
1
GND
P+6
P-6
USB_PWR
This header supports an
IRTX
+5V optional wireless transmitting
DUMMY
and receiving infrared module.
1
GND
IRRX
2 7 2 7 2 7 2 7 2 7