COMPACT DISC PLAYER
D-5100
HISIE
DIGITAL AUDIO
Operating
Instructions |
Thank you for buying this Pioneer product
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in
the explanatory
drawings.
However,
the method
of con-
necting and operating the unit is the same
WARNING :10 prevent FiRE OR SHOCK HAZ-
ARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war
ranty card and keep it in a secure
area.
This is for your
security
[For Canadian
model]
CAUTION: 10 prevent
ELectRiC SHOCK
DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION: pour
prevenia
Les
cHocs
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
product is manutactured to comply with the radio inter
ference
requirements
of
EEC
Directive
76/889/EEC
and
82/493
EE
i
LINE VOLTAGE
SELECTOR
SWITCH
Only multi-voltage
models
are provided
with
this
switch. U.S., Canadian. European, U.K., and Austra-
lian models are not provided with this switch.
Mains
voltages in Saudi Arabia are 127V and 220V
only.
Never
use this model
with
110V
setting
in:
Saudi Arabia.
The line voltage selector switch is located on the rear
panel of this player. Before your player is shipped from
the factory, the switch is set to the power
require-
ments of the player's destination. Check that itis set |
properly before plugging the power cord into the out-
let. if the voltage is not properly set or if you move
to an area where the voltage requirements differ, ad-
just the selector switch as follows:
VOLTAGE
SELECTOR
%
@ PIONEER'
The future of sound and vision.
Need help?
Do you have a question about the PD-5100 and is the answer not in the manual?
Questions and answers
**** SE PUNE IN FUNCTIUNE APARATUL?
To operate the Pioneer PD-5100 Compact Disc Player:
1. Confirm Supplied Accessories – Ensure you have the remote control unit, two AAA (RO3) dry cell batteries, and an output cable.
2. Insert Batteries in Remote Control – Place the AAA batteries correctly. If not using for over a month, remove batteries to prevent leakage.
3. Power Connection – Plug the device into a compatible power outlet. If using a multi-voltage model, set the correct voltage.
4. Turn On the Device – Use the power button to switch it on.
5. Load a CD – Open the disc tray, place a compact disc in the tray, and close it.
6. Playback Controls – Use the play, pause, stop, and track selection buttons to operate the player.
7. Cleaning and Maintenance – Wipe with a dry cloth and avoid volatile liquids like benzene or thinner.
For further details, refer to the operating manual.
This answer is automatically generated