Suncast BMS7775 Owner's Manual

SLITCAST.
OWNER'S MANUAL BMS7775 Shed
Includes instructions for 7 1/2' x 7' x 8 1/2' shed
Assembled exterior dimensions: 7' 6" W. x 7' 2 1/4" D. x 8' 7" H.
Before You Begin...
• Consult your local authorities for any permits required to construct shed.
Prior to the construction of your shed, check with the local building code official to review any required
permits or building limitations.
e A level and sturdy foundation is required before shed construction can begin.
Site preparation information is available on page 10.
* Read instructions thoroughly prior to assembly.
This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence.
* Please follow instructions.
Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly.
• Check for all parts before you begin assembly.
Using the provided parts check list on pages 3-9, verify that you have all the parts required to construct
your shed model. COMPLETE SITE PREPARATION AND FOUNDATION CONSTRUCTION BEFORE
UNPACKING ALL PARTS.
* Assistance is required during entire assembly.
* Proper site preparation required.
• Shed not intended for use in extreme weather conditions.
• Shed not intended for storage of flammable or caustic chemicals.
e Store heavy items near the bottom of shed.
e Shed not intended for use by children.
* DO NOT stand, sit, or store items on storage shed roof.
e Treat carefully in extreme temperatures.
* Repair or replace broken parts immediately.
e Suncast is not responsible for damage caused by weather or misuse.
* At regular intervals inspect your shed to make sure that assembly integrity has been maintained.
* Periodically check that the location you have chosen to set your shed is still level.
e This kit contains parts with metal edges. Please be careful when handling.
С ‫ه‬ ‫ه‬ ‎ __( À
© 2011 Suncast Corporation, Batavia, IL 0361123A