Advertisement
Quick Links
Frequently Asked Questions Answers
1, There is no arc or the arc is weak.
① First, check whether the consumables of the cutting torch are installed correctly, whether
there are gaps, and reinstall the consumables.
②Check whether the air pressure is set too high. The recommended air pressure is
0.3-0.4MPA/44-58 PSI.
③When cutting, according to the thickness of the cutting, you can refer to the following set
current size.
Advertisement
Related Manuals for S7 CUT50
Summary of Contents for S7 CUT50
- Page 1 Frequently Asked Questions Answers 1, There is no arc or the arc is weak. ① First, check whether the consumables of the cutting torch are installed correctly, whether there are gaps, and reinstall the consumables. ②Check whether the air pressure is set too high. The recommended air pressure is 0.3-0.4MPA/44-58 PSI.
- Page 2 Frequently Asked Questions Answers 2，Can it be used with a generator? We do not recommend using it with a generator. The voltage of the generator is unstable, and the machine will repeat the voltage conversion to reduce the life of the capacitor. If it must be used with a generator, the voltage must be stable, and the output power must be more than 7KW.
Need help?
Do you have a question about the CUT50 and is the answer not in the manual?
Questions and answers