Samson Go Mic Video Manual page 6

Connecting to a Computer
Using the Go Mic Video with macOS:
1. Click the Spotlight icon or press Command+Space to open Spotlight search. Begin
typing "audio MIDI Setup" until the option appears to open the Audio MIDI Setup
application.
2. Open Audio MIDI Setup and select the Samson Go Mic Video device. Make sure
this device is being used for sound input and sound output by right clicking on the
"Samson Go Mic Video" entry. The microphone and speaker icons will show up on
the Samson Go Mic Video entry when enabled.
3. Check the "Thru" box in the input tab in order to hear the Go Mic Video's
microphone in real time through the Go Mic Video's headphone output jack.
4. Uncheck the "Thru" box to turn off real-time monitoring. Follow this step if you
plan to monitor mic input from a DAW (Digital Audio Workstation).
5.
Use the "Format" dropdown menu to change the sample rate. The "mute" check
box mutes the microphone, "Front Left" and "Front Right" changes the mic gain in
left and right channels independently. (NOTE: any grayed out controls cannot be
modified).
6. In the output tab, the Go Mic Video's headphone output can be controlled.
Checking the "mute" box will mute the headphone output. The "Front Left"
and "Front Right" sliders allow you to control left and right channel volume
independently