Quick Start
Follow this simple quick start for a typical set-up to start recording.
Using the Go Mic Video with a computer
1.
Unfold the Go Mic Video, press the clip in and set the microphone on the top
of your laptop screen. If you prefer, you can position the Go Mic Video on your
desktop by using back of the clip as a desk stand.
2.
Set the Go Mic Video's pattern switch. If you are recording a single person, set
the switch to the Cardioid position and be sure to face the front side, with the
Samson logo. If recording multiple subjects, set the switch to the Omni position.
3.
Connect headphones to the Headphone output located on the side of the
microphone.
4.
Plug the USB C cable to the Go Mic Video and plug the other end of the cable into
an available USB port on your computer.
5.
Launch your recording or conferencing software, turn down the main output level
and select the Go Mic Video for the input and outputs.
6.
Adjust the angle/position of the mic so that the camera is facing the subject.
7.
Set up a mono recording track in your software.
8.
Set the level of the microphone following the instructions in "Connecting to a
Computer".
9.
Set the level of your headphones to a comfortable listening level by following the
steps in the section "Connecting to a Computer".
10.
Press the record button and start creating.
Go Mic Video Portable USB Microphone with HD Webcam
Need help?
Do you have a question about the Go Mic Video and is the answer not in the manual?