ASROCK G31DE User Manual page 8

Hide thumbs Also See for G31DE:
Table of Contents

Advertisement

WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
CAUTION!
1.
FSB1600-CPU will operate in overclocking mode. Under this situation,
PCIE frequency will also be overclocked to 120MHz.
2.
About the setting of "Hyper Threading Technology", please check page
32.
3.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 26 for details.
4.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 16 for proper installation.
5.
Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency
1600
1333
1066
800
* When you use a FSB1600-CPU on this motherboard, it will run at
DDR2 960 if you adopt a DDR2 1066 memory module. When you use
a FSB1333-CPU on this motherboard, it will run at DDR2 1000 if you
adopt a DDR2 1066 memory module.
* DDR2 1066 memory module will operate in overclocking mode.
6.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows
bit with 64-bit CPU, there is no such limitation.
7.
The maximum shared memory size is defined by the chipset vendor and
is subject to change. Please check Intel
8.
Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 25 to adjust your SATAII hard disk drive to
SATAII mode. You can also connect SATA hard disk to SATAII connector
directly.
9.
Power Management for USB 2.0 works fine under Microsoft
Vista
64-bit / Vista
TM
10. It is a user-friendly ASRock overclocking tool which allows you to surveil
your system by hardware monitor function and overclock your hardware
devices to get the best system performance under Windows
environment. Please visit our website for the operation procedures of
ASRock OC Tuner. ASRock website: http://www.asrock.com
8 8 8 8 8
Memory Support Frequency
DDR2 800, DDR2 1066 *
DDR2 667, DDR2 800, DDR2 1066 *
DDR2 667, DDR2 800, DDR2 1066
DDR2 667, DDR2 800
Vista
. For Windows
XP 64-bit and Windows
®
TM
®
website for the latest information.
®
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
TM
XP
®
Vista
64-
®
TM
Windows
®
®
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

G31de - v1.0P31de

Table of Contents