Chipset Configuration - ASROCK CONROEXFIRE-ESATA2 - VERSION 2.3 - 01-2007 User Manual

Intel (R) SpeedStep(tm) tech.
Intel (R) SpeedStep(tm) tech. is Intel's new power saving technology.
Processor can switch between multiple frequency and voltage points to
enable power savings. The default value is [Auto]. Configuration options:
[Auto], [Enabled] and [Disabled]. If you install Windows
[Auto], you need to set the "Power Schemes" as "Portable/Laptop" to en-
able this function. If you install Windows
function, please set this item to [Enabled]. This item will be hidden if the
current CPU does not support Intel (R) SpeedStep(tm) tech..
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
3.3.2 3.3.2

Chipset Configuration

Chipset Configuration
3.3.2 Chipset Configuration 3.3.2 3.3.2 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Configuration
DRAM Frequency
Flexibility Option
Configure DRAM Timing by SPD
DRAM CAS# Latency
Primary Graphics Adapter
OnBoard HD Audio
Front Panel Control
CD-In
OnBoard LAN
VCCM (DRAM) Voltage
+1.5V Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [200MHz (DDRII 400)], [266MHz
(DDRII 533)], [333MHz (DDRII 667)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Configure DRAM Timing by SPD
Select [Enabled] will configure the following items by the contents in the
SPD (Serial Presence Detect) device. If you select [Disabled], you will find
the items "DRAM RAS# to CAS# Delay", "DRAM RAS# Precharge", and
"DRAM RAS# Activate to Precharge" appear to allow you adjusting them.
Vista
® TM
Options
Auto
[Auto]
200MHz (DDRII400)
[Disabled]
266MHz (DDRII533)
[Enabled]
333 MHz (DDRII667)
[Auto]
[PCI]
[Auto]
Select Screen
[Auto]
Select Item
[Enabled]
+ - Change Option
[Enabled]
F1 General Help
F9 Load Defaults
[Auto]
F10 Save and Exit
[Normal]
ESC Exit
4 7 4 7 4 7
4 7 4 7
XP and select
®
and want to enable this