ASROCK CONROEXFIRE-ESATA2 - VERSION 2.3 - 01-2007 User Manual page 32

Connect the SATA
data cable to the red
SATAII connector
(SATAII_RED (PORT2))
2. If you plan to install two eSATAII devices to this motherboard, you need to
enable both the top and the bottom eSATAII ports of the I/O shield. In order to
enable the top and the bottom eSATAII ports of the I/O shield, you have to
connect the red SATAII connector (SATAII_RED; see p.11 No.13) and the red
eSATAII connector (eSATAII_BOTTOM; see p.11 No.36) with a SATA data
cable first, and then connect the orange SATAII connector (SATAII_ORANGE;
see p.11 No.14) and the orange eSATAII connector (eSATAII_TOP; see p.11
No.37) with another SATA data cable. After that, both the top and the bottom
eSATAII ports of the I/O shield are enabled.
Connect the SATA
data cables to both
red SATAII connector
(SATAII_RED (PORT2))
and orange SATAII
connector (SATAII_
ORANGE (PORT3))
Please make sure to correctly connect the SATAII and eSATAII connectors
with corresponding color so that the eSATAII function will work successfully.
Connect the SATA
data cable to the red
eSATAII connector
(eSATAII_BOTTOM)
Connect the SATA
data cables to both
red eSATAII connector
(eSATAII_BOTTOM)
and orange eSATAII
connector (eSATAII_TOP)
3 2 3 2 3 2
3 2 3 2