Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Headers
(9-pin USB67)
(see p.10 No. 20)
(9-pin USB45)
(see p.10 No. 21)
Infrared Module Header
(5-pin IR1)
(see p.10 No. 18)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.10 No. 24)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.10 No. 25)
1. High Definition Audio supports Jack Sensing, but the panel wire on the
chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to the
power supply
connector of the power supply.
Besides four default USB 2.0
USB_PWR
P-7
P+7
ports on the I/O panel, there are
GND
DUMMY
two USB 2.0 headers on this
1
motherboard. Each USB 2.0
GND
header can support two USB
P+6
P-6
USB_PWR
2.0 ports.
USB_PWR
P-5
P+5
GND
DUMMY
1
GND
P+4
P-4
USB_PWR
This header supports an
IRTX
+5VSB
DUMMY
optional wireless transmitting
1
and receiving infrared module.
GND
IRRX
This connector allows you
to receive stereo audio input
CD-L
GND
GND
from sound sources such as
CD-R
a CD-ROM, DVD-ROM, TV
CD1
tuner card, or MPEG card.
This is an interface for front
GND
PRESENCE#
panel audio cable that allows
MIC_RET
OUT_RET
convenient connection and
control of audio devices.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
2 0
2 0
2 0
2 0
2 0
Advertisement
Table of Contents
