Other Operations - Solmeta Geotagger Pro User Manual

7. Other Operations

" Indoors" Geotagging setting
The "indoors" geotagging function is the factory default. Disenable the function please follow the
procedure below.
1. Press the MENU button to select the screen display shown as below ( "LAT" appears )
2. Short Press ENTER button, a "beep" will be heard and the display screen shown as below, a LOC icon
is blinking.
3. Then short press the MENU button to select UNLOC, a UNLOC icon is blinking on the screen as below
4. Then short press ENTER button to confirm the setting.
"Auto Power on/ off " setting
The Geotagger Pro with the
camera is turned on and will turn off when the camera is turned off. Use-friendly, power saved. The
procedure as below.
1.With the Geotagger Pro power on, short press the Power switch one time, a "beep" will be heard and a
"AUTO" will be displayed in the LCD, "Auto power on/off " is enabled in this status.
2. Disenable the " Auto Power on/off ", just short press the MENU button.
Note

Backlight is automatically on with every button-press. It will turn off automatically after 6 seconds.

Beep tone:
o
Short press the button for 1 second, and you will hear one beep.
o
Long press the button for 2-3 second, no beep.
" "
Auto Power on/ off feature, which allow the device will turn on when the
14