Solmeta Geotagger Pro User Manual page 8

SUN: The number in the left is the satellite which are used for signal acquisition. 2d means 2-3 satellites
are used, 3d means 4 or more than 4 satellites are used.
DIR: The number indicates the compass heading.
GRA: Gradient. The number in the left is the pitching angle data, the number in the right is the roll angle
date, and the bar immediately in the position left of the numbers indicates the status of the object.
MEM: Memory size. The number indicates the used memory capacity in percent.
CON: The CON icon indicates the device continues to record the GPS data, the logging interval can be set
from 5-second to 30-minute.
REC: The REC icon indicates the device has been stopped the continuing recording.
GPS indicator: GPS Icon indicates the Pro is receiving a signal or not. A blinking GPS icon indicates that the
Pro is searching for a GPS signal. A steady GPS icon indicates that the Pro is providing the GPS data to the
camera.
Battery indicator: The icon indicates the battery level. When the internal battery of the Pro is low, battery
icon will blink. When internal battery is extremely low, the Pro will automatically switch to use the camera
battery.
8