Advertisement
With the latest cold diffusion technology, our waterless essential oil aroma diffuser converts essential oil into nano vapor to approximately 1-3 microns without using heat or water. The diffusing process does not damage the molecular structure, therefore maintaining its therapeutic properties for easier absorption into the body. It is easier, more hygienic and safer. We make it compact enough for you to fit it into your car cup holders so that you may take it with you wherever you go.
As it is compatible with the majority of essential oil bottles available, it gives you the freedom to choose from a wide range of fragrances that soothe you, relax you, or refresh you in a variety of situations. Using it with sanitizing essential oils can improve unpleasant odors and help purify the air around it.
Level 1
15 seconds of diffusing, then a pause of 165s
Level 2
1 minute of diffusing, then a pause for 2 min
Level 3
2 minutes of diffusing, then a pause for 1 min
Ambient light on
Battery running normally
Stays green
Low battery alert
Blinks 10 times and then shuts down
Removal:
Push from the top and lift your finger until you hear a "tick" sound. The nozzle will stick out. You may simply pull it out to change / install a bottle of essential oil.
Installation:
Screw the bottle to the nozzle, and then push the nozzle until you hear a "tick" sound. In order to install properly, look for the "" sign before you push the nozzle.
Normal charging time: 3-5 hours. If the charging current is below 1A, it will take longer to fully charge the device.
Fully charge this diffuser before using it the first time.
As charging cycles increase, battery life will decrease.
Max. Oil Capacity: 20ml
Input: DC-5V/1A
Rated Power: 1.5W
Size: 70*125mm
Battery Capacity: 2000mAh
Net Weight: 300g
Q1: How to select the right essential oil?
Use 100% pure essential oils. Resin and thick oil are not recommended. Camphor tree, eaglewood and dried orange peel oils are prohibited.
Q2: When I change to a new oil, there is mixed smell coming from my previous oil. How do I clean the nozzle and the bottle?
Fill the empty bottle with 5ml of 99% ethyl/ethanol alcohol. Shake to fully rinse the inner surface of the bottle and then empty it. Refill with another 5ml of ethyl/ethanol alcohol, and then run the device until the alcohol runs out.
Q3: I feel like it stops running sometimes, what has happened?
Please refer to section 4 for 'mist level explained'. The device is able to automatically optimize atomizing/pausing according to mist level.
Q4: How long does it take to fully charge the device?
Normally 3-5 hours.
support@airversa.com
www.airversa.com
If you have any questions or concerns about your new product, please feel free to contact our Customer Service Team.
Improper placement of the diffuser when an essential oil bottle is installed might cause oil leakage (eg. when the unit is tilted at an angle).
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the SCENTA and is the answer not in the manual?
Questions and answers