Bios Configuration Utility; Enter Bios Configuration Utility; Bios Setup Utility - ASROCK ALIVENF4G-DVI Installation Manual

2.3 BIOS Setup Utility

2.3.1 Enter BIOS Setup Utility
After the system powers on, press <F2> key to enter BIOS setup
utility. Highlight Advanced and press <Enter>, then the main inter-
face of BIOS setup utility will appear. Please set the option SATA
Operation Mode to [RAID].
IDE Configuration
OnBoard IDE Controller
OnBoard SATA Controller
SATA Operation Mode
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
SATA1
SATA2
v02.53 (C) Copyright 1985-2004. American Megatrends, Inc.
After the below window appears, please press <F10> to enter the
NVIDIA RAID Utility.
NVIDIA RAID IDE ROM BIOS 4.81
Copyright (C) 2004 NVIDIA Corp.
Detecting array . . .
Press F10 to enter RAID setup utility . . .
BIOS SETUP UTILITY
Advanced
[Both]
[Enabled]
[RAID]
[Hard Disk]
[Not Detected]
[ATAPI CDROM]
[Not Detected]
[Not Detected]
[Not Detected]
7
Config SATA operation
mode.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit