Specifications - Aiwa CT-FX929M m Operating Instructions Manual

SPECIFICATIONS
RADIO SECTION
(FM)
FrequencyRange:
87.5 MHz–108 MHz
(100-kHz steps)
87.5 MHz–I08 MHz
(50-kHz steps)
Usable Sensmwty 127dBf
50 dB Quieting Sensitivity.
172dBf
IF Rejection'
80 dB
Frequency Response 30 Hz–1 5,000 Hz
S/N Ratio"
63 dB
Stereo Separation: 35 dB at 1 kHz
Alternate Channel Selecbvlty
70 dB
Capture Ratio:
3 dB
(AM)
Frequency Range
530 kHz–1 ,710 kHz
(1O-kHz steps)
531 kHz–1 ,602 kHz
(9-kHz steps)
Usable Senslbwty. 30 PV (30 dB)
TAPE
SECTION
Tape Speed: 4,8 cm/sec (17/8 Ips)
S/N Rabo (normal) 50 dB
S/N Ratio (metal): Dolby NR off 54 dB
Dolby NR on 64 dB
Frequency Response 40 Hz-14,000 Hz (normal)
40 Hz-16,000 Hz (metal)
Stereo Separation 40 dB
FF/REW Time:
95 sec. (C-60)
AUDIO SECTION
Max. Power Output: 40 W x 4 channels
GENERAL
Power-Supply Voltage
14.4 V (11 to 16 V allowable),
DC, negative ground
Load Impedance. 4 .(2
Tone Control. Bass al O dB at 100 Hz
Treble *IO dB at 10 kHz
Preamp Output Voltage (load Impedance):
40 V(10kQ)
Installabon size 182 (W) x 53 (H) x 155 (D) mm
(7 '/4 (W)X2'/,(H)X61/6 (D)
inches)
Accessory supphed: Carrying case(1)
*Specifications and external appearance are
subject to change without notice due to product
Improvement.
(,Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation.
o"DOLBy" and the double-D symbol no are
trademarks of Dolby Laboratories Licensing
Corporation.
CD/MD IN input
Inputsensitivity (loadimpedance)
CDIMD IN:
500
mV (1O kQ)
ENGLISH ~
8