Maintenance.6; Specifications.6 - Aiwa CDC-Z117 Operating Instructions Manual

TROUBLESHOOTING
Error code
In the following cases the corresponding error code
solve such problems. If the error code indication does
E03 Focus error. Checkthatthe CD is loaded properly
(right side up, etc.), and the CD contains valid
Reset button
If a CD does not operate properly, press the reset button
with a pointed object such as a pencil, etc. Note that all
your settings will be erased if this button is pressed.
Reset button
MAINTENANCE
Cleaning the front panel
Wipe the surface with a soft, dry cloth.
SPECIFICATIONS
RADIO SECTION
(FM)
Frequency Range: 87.5 MHz - 108 MHz (100-kHz
steps)* or 87.5 MHz - 108 MHz (50-kHz steps)*
Usable Sensitivity: 12.7 dBf
50 dB Quieting Sensitivity: 17.2 dBf
IF Rejection: 80 dB
Frequency Response: 30 Hz - 15,000 Hz
S/N Ratio: 63 dB
Stereo Separation: 35 dB at 1 kHz
Alternate Channel Selectivity: 70 dB
Capture Ratio: 3 dB
(AM)
Frequency Range: 530 kHz - 1,710 kHz (10-kHz
steps)* or 531 kHz - 1,602 kHz (9-kHz steps)*
Usable Sensitivity: 30 pV (30 dB)
9kr~Ul0k
* Set the frequency increment for your area using
the switch on the bottom of the unit. (The switch
is factory-set to the 10k position [for the U.S.A.])
CD SECTION
Frequency Response: 17 Hz - 20 kHz +0/-3 dB
Dynamic Range: More than 80 dB
Channel Separation: More than 65 dB
S/N Ratio: More than 85 dB
Wow/Flutter: Not applicable
AUDIO SECTION
Max. Power Output: 45 W x 4 channels
AUX IN Input
Input sensitivity (load impedance) AUX IN: 300 mV
(10 k£2)
GENERAL
Power-Supply Voltage: 14.4 V (11 to 16 V
allowable), DC, negative ground
Load Impedance: 4 n
Tone Control:
Preamp Output Voltage (load impedance): 2.2 V
(10k£l)
Installed size: 182 (W) x 53 (H) x 155 (D) mm
(7 1/4 (W) x 2 Vs (H) x 6 Vs (D) inches)
• Specifications and external appearance are subject to
change without notice due to product improvement.
REAR PANEL
ENGLISH 6