Driver Installation Guide; Installing Windows; Vista Tm - ASROCK A780FULLDISPLAYPORT - V1.2 User Manual

2 . 1 4

2 . 1 4 Driver Installation Guide

2 . 1 4 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2 . 1 4 2 . 1 4 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 5 2 . 1 5

2 . 1 5 Installing Windows

2 . 1 5 2 . 1 5 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista 64-bit W 64-bit W 64-bit With RAID F
Vista Vista 64-bit W 64-bit W
TM TM TM TM TM
If you want to install Windows
Vista 64-bit on a RAID disk composed of 2 or more SATA / SATAII HDDs with RAID
TM
functions, please follow below procedures according to the OS you install.
2.15.1 Installing W 2.15.1 Installing W 2.15.1 Installing W 2.15.1 Installing W 2.15.1 Installing Windows indows indows indows indows
If you want to install Windows
2 or more SATA / SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII Driver Diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C. When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
E. The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID installation
guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
®
ith RAID Functions ith RAID F ith RAID F unctions unctions unctions
ith RAID F unctions
XP, Windows XP 64-bit, Windows
® ®
XP / XP 64-bit With RAID F XP / XP 64-bit W XP / XP 64-bit W XP / XP 64-bit W XP / XP 64-bit W
®
XP or Windows XP 64-bit on a RAID disk composed of
® ®
Advanced screen
XP / XP 64-bit.)
®
3 9 3 9 3 9 3 9 3 9
/ / / / /
TM TM TM TM TM
Vista or Windows
® TM ®
ith RAID F ith RAID F ith RAID F ith RAID Functions unctions unctions unctions unctions
IDE Configuration.