ASROCK A780GMH128M_846 Installation Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. A780GMH128M_846 -
  6. Installation manual
ASROCK A780GMH128M_846 Installation Manual

ASROCK A780GMH128M_846 Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock
Published January 2009
A780GMH/128M
Motherboard
1 1 1 1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A780GMH128M_846 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ASROCK A780GMH128M_846

Summary of Contents for ASROCK A780GMH128M_846

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

  • Page 2: Motherboard Layout

    (HD_AUDIO1, Lime) Southbridge Controller Infrared Module Header (IR1) Chassis Fan Connector (CHA_FAN1) PCI Slots (PCI1- 2) Fourth SATAII Connector (SATAII_4 (PORT 3)) 31 PCI Express 2.0 x16 Slot (PCIE2; Green) Third SATAII Connector (SATAII_3 (PORT 2)) Northbridge Controller Secondary SATAII Connector PCI Express 2.0 x1 Slot (PCIE1;...
  • Page 3 Line In (Light Blue) PS/2 Keyboard Port (Purple) ** 8 Front Speaker (Lime) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK...
  • Page 4 To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on your system. Please follow below instructions according to the OS you install.
  • Page 5 ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.

  • Page 6: Specifications

    - Solid Capacitor for CPU power - Support for Socket AM2+ / AM2 processors: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / Sempron processor - AM3 CPU Ready...
  • Page 7 - 1 x Optical SPDIF Out Port - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/ Line in/Front Speaker/Microphone (see CAUTION 7) Connector - 6 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0,...
  • Page 8 BIOS, applying Untied Overclocking Technology, or using the third-party overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Page 9 Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 30 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.
  • Page 10 Vista or Windows Vista * If you need to use CyberLink PowerDVD Ultra version 7.3, we suggest to disable Hardware Acceleration function for better playback performance and compatibility. After executing CyberLink PowerDVD Ultra program, please follow below steps to disable Hardware Acceleration function.
  • Page 11 1 . 4 1 . 4 1 . 4 P P P P P assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD-D -D -D...

  • Page 12: Pre-Installation Precautions

    Installation Installation Installation This is a Micro ATX form factor (9.6-in x 8.6-in, 24.4 cm x 21.8 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions...

  • Page 13: Installation Of Cpu Fan And Heatsink

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
  • Page 14 (the same brand, speed, size and chip-type) DDR2 DIMM pair in the slots of the same color. In other words, you have to install identical DDR2 DIMM pair in Dual Channel A (DDRII_1 and DDRII_2; Yellow slots;...

  • Page 15: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

  • Page 16: Expansion Slots (Pci And Pci Express Slots)

    2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x1 slot;...

  • Page 17: Multi Monitor And Surround Display Features

    VGA/DVI-D port HDMI port 2. If you have installed onboard VGA driver from our support CD to your system already, you can freely enjoy the benefits of multi monitor function after your system boots. If you haven’t installed onboard VGA driver yet, please install onboard VGA driver from our support CD to your system and restart your computer.
  • Page 18 [512MB] to enable the function of VGA/D-sub. Please make sure that the value you select is less than the total capability of the system memory. If you do not adjust the BIOS setup, the default value of “Share Memory”, [Auto], will disable VGA/D-Sub function when the add-on VGA card is inserted to this motherboard.
  • Page 19 Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below. A. Click the number ”2” icon. B. Click the items “This is my main monitor” and “Extend the desktop onto this monitor”. C. Click “OK” to save your change.
  • Page 20 VGA driver installed in your system. Step 5. Install the onboard VGA driver from our support CD to your system for both the onboard VGA and the discrete graphics card. Step 6. Restart your computer. Then you will find “ATI Catalyst Control Center” on ®...
  • Page 21 * Hybrid CrossFireX appearing here is a registered trademark of ATI Technologies Inc., and is used only for identification or explanation and to the owners’ benefit, without intent to infringe. * For further information of ATI Hybrid CrossFireX technology, please check AMD website for up dates and details.

  • Page 22: Jumpers Setup

    After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS.

  • Page 23: Onboard Headers And Connectors

    Floppy Connector (33-pin FLOPPY1) (see p.2 No. 25) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 9)
  • Page 24 USB 2.0 Headers Besides four default USB 2.0 ports on the I/O panel, there are (9-pin USB10_11) three USB 2.0 headers on this (see p.2 No. 23) motherboard. Each USB 2.0 header can support two USB 2.0 ports.
  • Page 25 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 26 (see p.2 No. 8) Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.

  • Page 27: Installing Windows

    Driver Installation Guide Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.

  • Page 28: Untied Overclocking Technology

    ” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the AMD AHCI drivers. AMD AHCI drivers are in the following path in our Support CD:...

  • Page 29: Bios Information

    To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.
  • Page 30 Wir danken Ihnen für den Kauf des ASRock A780GMH/128M Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.

  • Page 31: Spezifikationen

    1 . 2 Spezifikationen Spezifikationen Plattform - Micro ATX-Formfaktor: 24.4 cm x 21.8 cm; 9.6 Zoll x 8.6 Zoll - Festkondensator für CPU-Leistung - Unterstützung für Socket AM2+ / AM2-Prozessoren: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dualkern / Athlon X2 Dualkern / Athlon 64 / Sempron-Prozessor - AM3 CPU-fähig...
  • Page 32 - 1 x HDMI port - 1 x optischer SPDIF-Ausgang - 4 x Standard-USB 2.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - HD Audiobuchse: Lautsprecher seitlich / Lautsprecher hinten / Mitte/Bass / Audioeingang/ Lautsprecher vorne / Mikrofon (siehe VORSICHT 7) Anschlüsse...
  • Page 33 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 34 Ob die Speichergeschwindigkeit 1066 MHz unterstützt wird, hängt von der von Ihnen eingesetzten AM2+-CPU ab. Schauen Sie bitte auf unseren Internetseiten in der Liste mit unterstützten Speichermodulen nach, wenn Sie DDR2 1066-Speichermodule einsetzen möchten. ASRock-Internetseite: http://www.asrock.com Durch Betriebssystem-Einschränkungen kann die tatsächliche ®...
  • Page 35 CPU-Busfrequenzen abweichen, können Instabilität des Systems verursachen oder die CPU beschädigen. 13. Wird eine Überhitzung der CPU registriert, führt das System einen automatischen Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein.

  • Page 36: Installation

    2. Installation 2. Installation 2. Installation Dies ist ein Motherboard mit einem Micro ATX-Formfaktor (9,6 Zoll x 8,6 Zoll, 24,4 cm x 21,8 cm). Vor Installation des Motherboards müssen Sie die Konfiguration Ihres Gehäuses dahingehend überprüfen, ob das Motherboard dort hineinpasst.
  • Page 37 2.1 CPU Installation 2.1 CPU Installation Schritt 1: Öffnen Sie den CPU-Sockel, indem sie den Hebel leicht zur Seite und dann nach oben ziehen, auf einen Winkel von 90°. Schritt 2: Positionieren Sie die CPU genau so über dem Sockel, dass sich die Ecke der CPU mit dem goldenen Dreieck exakt über der Ecke des...
  • Page 38 Chiptyp) DDR2 DIMM-Paare in den Steckplätzen gleicher Farbe installieren. Mit anderen Worten, sie müssen ein identisches DDR2 DIMM-Paar im Dual-Kanal A (DDRII_1 und DDRII_2; gelbe Steckplätze, siehe Seite 2 Nr. 6) oder ein identisches DDR2 DIMM-Paar im Dual-Kanal B (DDRII_3 und DDRII_4; orange Steckplätze, siehe Seite 2 Nr.
  • Page 39 Öffnen Sie einen DIMM-Slot, indem Sie die seitlichen Clips nach außen drücken. Schritt 2: Richten Sie das DIMM-Modul so über dem Slot aus, dass das Modul mit der Kerbe in den Slot passt. Die DIMM-Module passen nur richtig herum eingelegt in die Steckplätze.
  • Page 40 -Slots): 2.4 Er 2.4 Er weiterungssteckplätze: (PCI- und PCI Express -Slots): Es stehen 2 PCI- und 2 PCI Express-Slot auf dem A780GMH/128M Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. PCI Express-Slots: PCIE1 (PCIE x1-Steckplatz; grün) wird für PCI Express- Grafikkarten mit x1-Busbreite verwendet wie Gigabit LAN- Karten, SATA2-Karten, usw.

  • Page 41: Einstellung Der Jumper

    Überbrücken Sie Pin2, Pin3, um +5VSB (Standby) zu setzen (siehe S.2, No. 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 3-Pin jumper) Default- CMOS (siehe S.2, No.
  • Page 42 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2, No. 25) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2, No. 9)
  • Page 43 Verbinden Sie das schwarze Stromversorgungskabel Ende des SATA-Netzkabels mit dem Netzanschluss am (Option) Verbindung zum Laufwerk. Verbinden Sie dann SATA-HDD-Stromanschluss das weiße Ende des SATA- Verbindung Stromversorgungskabels mit Netzteil dem Stromanschluss des Netzteils. USB 2.0-Header Zusätzlich zu den vier üblichen USB 2.0-Ports an den (9-pol.
  • Page 44 Front-Audioanschlussleiste: A. Schließen Sie Mic_IN (MIC) an MIC2_L an. B. Schließen Sie Audio_R (RIN) an OUT2_R und Audio_L (LIN) an OUT2_L C. Schließen Sie Ground (GND) an Ground (GND) an. D. MIC_RET und OUT_RET sind nur für den HD-Audioanschluss gedacht.
  • Page 45 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...
  • Page 46 Anschließend werden die mit Ihrem System kompatiblen Treiber automatisch erkannt und auf dem Bildschirm angezeigt. Zur Installation der nötigen Treiber gehen Sie bitte der Reihe nach von oben nach unten vor. Nur so können die von Ihnen installierten Treiber richtig arbeiten.

  • Page 47: Installation Von Windows

    System. ® Legen Sie Windows Vista / Vista 64-Bit optische Disc in das optische Laufwerk ein, um Ihr System zu starten. Folgen Sie anschließend den Anweisungen, um das ® Windows Vista / Vista 64-Bit Betriebssystem auf Ihrem System zu installieren.

  • Page 48: Untied Overclocking Technology

    Dieses Motherboard unterstützt die Entkoppelte Übertaktungstechnologie, durch die der FSB durch fixierte PCI-/PCIE-Busse beim Übertakten effektiver arbeiten. Bevor Sie die Entkoppelte Übertaktung aktivieren, stellen Sie bitte die Option “Overclock Mode” (Übertaktungsmodus) im BIOS von [Auto] auf [CPU, PCIE, Async.] um. Dadurch wird der CPU-FSB beim Übertakten entkoppelt, PCI- und PCIE-Busse werden jedoch fixiert, so dass der FSB in einer stabileren Übertaktungsumgebung arbeiten kann.
  • Page 49 Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP. EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup- Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.

  • Page 50: Contenu Du Paquet

    Contenu du paquet Contenu du paquet Carte mère ASRock A780GMH/128M (Facteur de forme Micro ATX: 9.6 pouces x 8.6 pouces, 24.4 cm x 21.8 cm) Guide d’installation rapide ASRock A780GMH/128M CD de soutien ASRock A780GMH/128M Un câble ruban IDE Ultra ATA 66/100/133 80 conducteurs Deux câble de données Serial ATA (SATA) (Optionnelle)
  • Page 51 - Condensateur résistant pour alimentation de processeur - Prise en charge des processeurs Socket AM2+ / AM2: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / processeur Sempron - Processeur AM3 prêt - Prise en charge d’AMD OverDrive...
  • Page 52 - br. 24 connecteur d’alimentation ATX - br. 4 connecteur d’alimentation 12V ATX - Connecteurs audio internes - Connecteur audio panneau avant - 3 x En-tête USB 2.0 (prendre en charge 6 ports USB 2.0 supplémentaires) (voir ATTENTION 9) BIOS - 8Mb BIOS AMI - BIOS AMI - Support du “Plug and Play”...
  • Page 53 64-bit Certifications - FCC, CE, WHQL * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 54 3 pour effectuer la bonne connexion. Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 30 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 55 12. Même si cette carte mère offre un contrôle sans souci, il n’est pas recommandé d’y appliquer un over clocking. Les fréquences autres que les fréquences de bus d’UC recommandées risquent de déstabiliser le système ou d’endommager l’UC. 13. Lorsqu’une surchauffe du CPU est détectée, le système s’arrête automatiquement.
  • Page 56 2. Installation 2. Installation Il s’agit d’une carte mère à facteur de forme Micro ATX (9,6 po x 8,6 po, 24,4 cm x 21,8 cm). Avant d’installer la carte mère, étudiez la configuration de votre châssis pour vous assurer que la carte mère s’y insère.
  • Page 57 Etape 1. Déverrouillez le support en relevant le levier selon un angle de 90 Etape 2. Placer l’UC directement au-dessus de la prise pour que le coin de l’UC avec son triangle jaune coïncide avec le petit triangle dans le coin de la prise.
  • Page 58 Double. Pour effectuer une configuration à canal double, vous devez toujours installer des paires de DIMM DDR2 identiques (de la même marque, de la même vitesse, de la même taille et du même type de puce) dans les slots de même couleur. En d’autres termes, vous devez installer une paire de DIMM DDR2 identiques dans le Canal Double A (DDRII_1 et DDRII_2;...
  • Page 59 Si vous adoptez des modules de mémoire DDR2 1066 sur cette carte mère, il est recommandé de les installer dans les fentes DDRII_3 et DDRII_4. Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM...

  • Page 60: Installation D'une Carte D'extension

    Slot d’extension (Slots PCI et Slots PCI Express) Slot d’extension (Slots PCI et Slots PCI Express) Il y a 2 ports PCI et 2 ports PCI Express sur la carte mère A780GMH/128M. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 61 Toutefois, veuillez ne pas effacer la CMOS tout de suite après avoir mis le BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à...
  • Page 62 (voir p.2 fig. 25) Broche1 Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2 No. 9)
  • Page 63 SATA sur le connecteur (en option) connecter au d’alimentation sur chaque unité. connecteur Connectez ensuite l’extrémité c o n n e c t e r à d’alimentation du blanche du cordon d’alimentation l’unité disque d’alimentation SATA sur le connecteur dur SATA électrique...
  • Page 64 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 65 (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur. Si vous prévoyez de connecter le ventilateur de CPU à 3 broches au connecteur du ventilateur de CPU sur cette carte mère, veuillez le...
  • Page 66 XP / XP 64-bit / Vista / Vista 64-bit OS sur votre lecteur de disque dur SATA / SATAII avec les fonctions RAID, veuillez vous référer au document de l’étape suivante sur le CD de support pour connaître la procédure détaillée: ..\ RAID Installation Guide (Guide d’installation RAID)
  • Page 67 à gauche pour charger les pilotes AHCI AMD. Les pilotes AHCI AMD sont sous le chemin suivant du CD Support: (IL y a deux ASRock Support CD dans le paquet de boite de cadeau de la carte mere, veuilliez selectionner un pour Windows ®...

  • Page 68: Informations Sur Le Cd De Support

    BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 69 Grazie per aver scelto una scheda madre ASRock A780GMH/128M, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Page 70 - Condensatore solido per alimentazione CPU Processore - Supporto per processori Socket AM2+ / AM2: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / processore Sempron - Pronto per CPU AM3...
  • Page 71 - 1 x Porta HDMI - 1 x Porta ottica SPDIF Out - 4 x porte USB 2.0 già integrate - 1 x porte LAN RJ-45 con LED (LED azione/collegamento e LED velocità) - Connettore HD Audio: cassa laterale / cassa posteriore / cassa...
  • Page 72 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 73 è una tecnologia rivoluzionaria che consente di realizzare risparmi energetici senza pari. Il regolatore di tensione è in grado di ridurre il numero di fasi in uscita in modo da migliorare l’efficienza quando i nuclei della CPU sono inattivi. In alter parole, permette di realizzare risparmi energetica senza pari e di migliorare l’efficienza energetica senza ridurre le prestazioni del...
  • Page 74 CPU. Tuttavia, non possiamo garantire la stabilità del sistema per tutte le configurazioni CPU/DRAM. Se il sistema è instabile dopo avere abilitato la funzione AM2 Boost, significa che la funzione non è adatta al sistema. Si può scegliere di disabilitare la funzione per mantenere la stabilità...
  • Page 75 2. Installazione Questa è una scheda madre con Form Factor Micro ATX (9.6 pollici x 8.6 pollici; 24,4 cm x 21,8 cm). Prima di installare la scheda madre, studiare la configurazione del telaio per assicurarsi che la scheda madre vi si adatti.
  • Page 76 2.1 Installazione del processore Step 1. Aprire lo zoccolo sollevando la leva da un angolo di 90°. Step 2. Posizionare la CPU direttamente sopra la presa in modo tale che l’angolo della CPU con il triangolo dorato corrisponda all’angolo della presa con il triangolino.
  • Page 77 2.3 Installazione dei moduli di memoria (DIMM) La scheda madre A780GMH/128M fornisce quattro alloggiamenti DIMM DDR2 (Double Data Rate 2) a 240 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDR2 negli alloggiamenti dello...
  • Page 78 Sbloccare lo slot DIMM premendo i fermi che lo trattengono verso l’esterno. Step 2. Allineare una DIMM sullo slot così che il pettine della DIMM combaci con la sua sede sullo slot. La DIMM può essere montata correttamente soltanto con un orientamento.
  • Page 79 Step 2. Rimuovere i ganci sullo slot che si intende utilizzare. Tenere a portata di mano le viti. Step 3. Allineare il connettore della scheda con lo slot e premere con decisione finché...
  • Page 80 Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin.
  • Page 81 (33-pin FLOPPY1) (vedi p.2 item 25) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 Nr. 9)
  • Page 82 SATA al gruppo connettore power di alimentazione dell’alimentatore. Collettore USB 2.0 Oltre alle quattro porte USB 2.0 predefinite nel pannello I/O, la (9-pin USB10_11) scheda madre dispone di tre (vedi p.2 No. 23) intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0.
  • Page 83 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 84 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 85 Vista 64 bit con funzioni RAID 64 bit con funzioni RAID 64 bit con funzioni RAID Se sugli HDD SATA / SATAII con funzione RAID si vuole installare il sistema operativo ® Windows XP / XP 64-bit / Vista / Vista...
  • Page 86 “Modalità Overclock” nelle impostazioni del BIOS per impostare la selezione da [Auto] a [CPU, PCIE, Async.]. A questo punto, la CPU FSB è “libera” durante l’overclocking, ma i bus PCI e PCIE sono nella modalità fissata in modo tale che l’FSB posa operare sotto un più stabile ambiente di overclocking.
  • Page 87 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.
  • Page 88 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 89 1 . 2 1 . 2 Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 21,8 cm, 9,6” x 8,6” - Condensador sólido para alimentación de CPU Procesador - Soporte para procesadores con zócalo AM2+ y AM2: AMD Phenom...
  • Page 90 - 1 x puerto de salida óptica SPDIF - 4 x puertos USB 2.0 predeterminados - 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y LED de VELOCIDAD) - Conexión de audio: Altavoz lateral / Altavoz trasero / Central/Bajos / Entrada de línea / Altavoz frontal / Micrófono...
  • Page 91 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 92 El apoyo de la reproducción de Blu-rayo de 1080p (BD) / HD-DVD en esta placa base requiere la configuración de hardware apropiada. Por favor refieren a la página 10 y 11 para el requisito mínimo de hardware y las películas de Blu-rayo de 1080p (BD) / HD-DVD pasado en nuestra prueba del laboratorio.
  • Page 93 13. Cuando la temperatura de CPU está sobre-elevada, el sistema va a apagarse automaticamente. Antes de reanudar el sistema, compruebe si el ventilador de la CPU de la placa base funciona apropiadamente y desconecte el cable de alimentación, a continuación, vuelva a conectarlo.

  • Page 94: Instalación

    2. Instalación 2. Instalación Esta placa base tiene un factor de forma Micro ATX (9,6 pulgadas x 8,6 pulgadas, 24,4 cm. x 21,8 cm). Antes de instalar la placa base, estudie la configuración de su chasis para asegurarse de que la placa base cabe en él.

  • Page 95: Instalación Del

    Paso 3. Coloque cuidosamente el CPU en el zócalo. El CPU se encaja al zócalo a una sola orientación. No esfuerce el CPU en el zócalo para prevenir encorvados de los pins del CPU. Si no puede encajar el CPU, examine su orientación o examine si los pins están ya...

  • Page 96: Instalación De Memoria

    DDR2 DIMM de Doble Canal A (DDRII_1 y DDRII_2; Ranuras Amarillas; consulte la p. 2 N. 6) o pares idénticos DDR2 DIMM en el Doble Canal B (DDRII_3 y DDRII_4; Ranuras Anaranjado; consulte p.2 N.7), de modo que pueda activarse la Tecnología de Memoria de Doble Canal.
  • Page 97 Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema. Paso 1. Empuje los clips blancos de retención por el extremo de cada lado de la ranura de memoria. Paso 2. Encaje la muesca del DIMM hacia la cumbrera de la ranura.
  • Page 98 Paso 2. Quite la tapa que corresponde a la ranura que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la ranura. Empuje firmemente la tarjeta en la ranura. Paso 4. Asegure la tarjeta con tornillos.
  • Page 99 3 para habilitar +5VSB (vea p.2, No. 1) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 3 pins) (ver p.2, No.
  • Page 100 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, No. 9)
  • Page 101 Cable de alimentación Conecte el extremo negro del de serie ATA (SATA) cable de SATA al conector de energía de la unidad. A (Opcional) Connettere continuación, conecte el all’ailmentazione extremo blanco del cable de dei dischi SATA Connettere al gruppo alimentación SATA a la...
  • Page 102 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 103 Guía de instalación del controlador Guía de instalación del controlador Para instalar los controladores en el sistema, inserte en primer lugar el CD de soporte en la unidad óptica. A continuación, se detectarán automáticamente los controladores compatibles con el sistema y se mostrarán en la página de controladores de CD compatibles.
  • Page 104 XP 64 bits, Windows Vista , Windows Vista 64 bits en sus HDDs SATA / SATAII y sin funciones RAID, siga los procedimientos que se indican a continuación en función del sistema operativo que tenga instalado. 2.10.1 Instalación de Windows 2.10.1 Instalación de Windows...
  • Page 105 AHCI de AMD se encuentran en la siguiente ruta de nuestro CD de soporte: (Hay dos CD del Apoyo de ASRock en el paquete de la caja del regalo de la placa ® base, por favor elige uno para Windows...
  • Page 106 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú...
  • Page 107 Gratos por comprar nossa placa–mãe A780GMH/128M, um produto confiável feito com ASRock um estrito controle de qualidade consistente. Com um excelente desempenho, essa placa é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade.
  • Page 108 1.2 Especificações 1.2 Especificações 1.2 Especificações Plataforma - Formato Micro ATX: 9,6 pol. x 8,6 pol., 24,4 cm x 21,8 cm - Condensador Solid para alimentação da CPU - Suporte para processadores Socket AM2+ / AM2: Processador AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2...
  • Page 109 - 1 x porta HDMI - 1 x porta óptica para saída SPDIF - 4 x portas USB 2.0 padrão - 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED VELOCIDADE) - HD Áudio Jack: Altifalante lateral / Altifalante traseiro /...
  • Page 110 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 111 Em termos do microfone, esta placa-principal suporta ambos os modos estéreo e mono. Quanto à saída de áudio, esta placa- principal suporta os modos de 2, 4, 6 e 8 canais. Consulte a tabela na página 3 para uma ligação correcta.
  • Page 112 13. Assim que se detecta um superaquecimento na CPU, o sistema se desliga automaticamente e o botão de energia do chassis fica inativo.Cheque o ventilador da CPU na placa–mãe, para verificar se está funcionando corretamente antes de religar o sistema. Para melhorar a dissipação de calor, lembre-se de aplicar o material de...

  • Page 113: Precauções Antes Da Instalação

    2. Instalação 2. Instalação A780GMH/128M é uma Micro ATX forma factor (9.6-in x 8.6-in, 24.4 cm x 21.8 cm) tábua principal. Antes de instalar a tábua principal, estude a configuração do seu chassi para assegurar que a tábua principal apropria a isto.
  • Page 114 CPU no soquete, para evitar que os pinos fiquem tortos. º passo: Quando o CPU é na posição, clique-o firmemente na tomada quando abaixa o nível de tomada para segurar o CPU. O nível clique na tecla do lado para indicar que é trandado. Levantar o Nível Até...
  • Page 115 DIMM DDR2 (mesma marca, tipo, tamanho e tipo de chip) nos slots de mesma cor. Ou seja, é preciso instalar um par idêntico de DIMM DDR2 no duplo canal A (DDRII_1 e DDRII_2; slots amarelas; veja a folha 2, No. 6) ou um par idêntico de DIMM DDR2 no duplo canal B (DDRII_3 e DDRII_4;...
  • Page 116 DIMM puxando para fora os seus clipes de retenção. º passo: alinhe a DIMM no slot de forma que o entalhe da DIMM fique alinhado com a ranhura no slot. A DIMM somente se encaixa em uma orientação correta.
  • Page 117 Retire a tampa que cobre o slot que você deseja usar; reserve os parafusos para uso futuro. º passo: Alinhe o conector da placa com o slot e pressiona com firmeza, até que a placa esteja totalmente encaixada no slot. º...
  • Page 118 (veja a folha 2, No. 1) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 3 pinos) (veja a folha 2, No. 24) Limpar o CMOS Configuração-...
  • Page 119 (veja a folha 2, No. 25) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2, No. 9)
  • Page 120 Conectores internos de áudio Estes conectores permitem que se receba entrada de (CD1 de 4 pinos) áudio em estéreo de fontes (CD1: veja a floha 2, No. 27) de áudio como CD-ROM, DVD-ROM, placa sintonizadora de TV ou placa MPEG. 1 4 0...
  • Page 121 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 122 20 pinos. Para usar a fonte de alimentação de 29 pinos, por favor ligue a sua fonte de alimentação com o Pino 1 e o Pino 13. Instalação da Fonte de alimentação ATX de 20 Pinos Conector ATX 12 V Note que é...
  • Page 123 óptica em primeiro lugar. Depois, os controladores compatíveis com o seu sistema poderão ser detectados automaticamente e surgir na lista na página do controlador do CD de apoio. Por favor, siga a ordem de cima para baixo ao lado para instalar os controladores necessários. Assim, os controladores que instalar poderão funcionar devidamente.
  • Page 124 / Windows Vista de 64 bits nas suas unidades de disco rígido SATA / SATAII sem as funções RAID, siga as etapas a seguir descritas. Use SATA / SATAII HDDs sem NCQ e Hot Plug funções ETAPA 1: Aceda à BIOS.
  • Page 125 Mode” (Modo de overclock) da configuração da BIOS para definir a função de [Auto] para [CPU, PCIE, Async.]. Por outras palavras, o FSB da CPU é separado durante o overclocking, mas os buses PCI e PCIE permanecem fixos para que o FSB possa funcionar num ambiente de overclocking mais estável.
  • Page 126 Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação, introduza o CD na leitora de CD-ROM do computador. Automaticamente iniciará o menu principal, casa o “AUTORUN”...
  • Page 127 1 4 7 1 4 7 1 4 7 1 4 7 1 4 7 ASRock A780GMH/128M Motherboard...
  • Page 128 ‘ ’ ® ® 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock A780GMH/128M Motherboard...
  • Page 129 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock A780GMH/128M Motherboard...
  • Page 130 ® “ ” ® ® ® ® 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock A780GMH/128M Motherboard...
  • Page 131 “ ” “ ” ® 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock A780GMH/128M Motherboard...
  • Page 132 1 5 2 1 5 2 1 5 2 1 5 2 1 5 2 ASRock A780GMH/128M Motherboard...
  • Page 133 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock A780GMH/128M Motherboard...
  • Page 134 “ ” 1 5 4 1 5 4 1 5 4 1 5 4 1 5 4 ASRock A780GMH/128M Motherboard...
  • Page 135 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock A780GMH/128M Motherboard...
  • Page 136 ® ® ® 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock A780GMH/128M Motherboard...
  • Page 137 “ ” “ ” “ ” “ ” 1 5 7 1 5 7 1 5 7 1 5 7 1 5 7 ASRock A780GMH/128M Motherboard...
  • Page 138 SATAII_5 SATAII_6 (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 SATAII_4 (PORT 0) (PORT 1) (PORT 2) (PORT 3) 1 5 8 1 5 8 1 5 8 1 5 8 1 5 8 ASRock A780GMH/128M Motherboard...
  • Page 139 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock A780GMH/128M Motherboard...
  • Page 140 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock A780GMH/128M Motherboard...
  • Page 141 ® ® 1 6 1 1 6 1 1 6 1 1 6 1 1 6 1 ASRock A780GMH/128M Motherboard...
  • Page 142 ® ® ® ® ® ® ® ® ® ® ® 1 6 2 1 6 2 1 6 2 1 6 2 1 6 2 ASRock A780GMH/128M Motherboard...
  • Page 143 ® ® ® ® ® ® ® “ ” 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock A780GMH/128M Motherboard...
  • Page 144 “ ” “ ” 1 6 4 1 6 4 1 6 4 1 6 4 1 6 4 ASRock A780GMH/128M Motherboard...
  • Page 145 1 6 5 1 6 5 1 6 5 1 6 5 1 6 5 ASRock A780GMH/128M Motherboard...
  • Page 146 ‘ ’ ® ® 1 6 6 1 6 6 1 6 6 1 6 6 1 6 6 ASRock A780GMH/128M Motherboard...
  • Page 147 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock A780GMH/128M Motherboard...
  • Page 148 ® ® ® “ ” ® ® ® ® 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock A780GMH/128M Motherboard...
  • Page 149 ® ® ® 1 6 9 1 6 9 1 6 9 1 6 9 1 6 9 ASRock A780GMH/128M Motherboard...
  • Page 150 1 7 0 1 7 0 1 7 0 1 7 0 1 7 0 ASRock A780GMH/128M Motherboard...
  • Page 151 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 ASRock A780GMH/128M Motherboard...
  • Page 152 1 7 2 1 7 2 1 7 2 1 7 2 1 7 2 ASRock A780GMH/128M Motherboard...
  • Page 153 1 7 3 1 7 3 1 7 3 1 7 3 1 7 3 ASRock A780GMH/128M Motherboard...
  • Page 154 ® ® ® 1 7 4 1 7 4 1 7 4 1 7 4 1 7 4 ASRock A780GMH/128M Motherboard...
  • Page 155 1 7 5 1 7 5 1 7 5 1 7 5 1 7 5 ASRock A780GMH/128M Motherboard...
  • Page 156 SATAII_5 SATAII_6 (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 SATAII_4 (PORT 0) (PORT 1) (PORT 2) (PORT 3) 1 7 6 1 7 6 1 7 6 1 7 6 1 7 6 ASRock A780GMH/128M Motherboard...
  • Page 157 1 7 7 1 7 7 1 7 7 1 7 7 1 7 7 ASRock A780GMH/128M Motherboard...
  • Page 158 1 7 8 1 7 8 1 7 8 1 7 8 1 7 8 ASRock A780GMH/128M Motherboard...
  • Page 159 ® ® ® ® 1 7 9 1 7 9 1 7 9 1 7 9 1 7 9 ASRock A780GMH/128M Motherboard...
  • Page 160 ® ® ® ® ® ® 1 8 0 1 8 0 1 8 0 1 8 0 1 8 0 ASRock A780GMH/128M Motherboard...
  • Page 161 ® ® ® ® ® ® ® 1 8 1 1 8 1 1 8 1 1 8 1 1 8 1 ASRock A780GMH/128M Motherboard...
  • Page 162 ® ® 1 8 2 1 8 2 1 8 2 1 8 2 1 8 2 ASRock A780GMH/128M Motherboard...
  • Page 163 1 8 3 1 8 3 1 8 3 1 8 3 1 8 3 ASRock A780GMH/128M Motherboard...
  • Page 164 ™ ‘ ’ ® ® 1 8 4 1 8 4 1 8 4 1 8 4 1 8 4 ASRock A780GMH/128M Motherboard...
  • Page 165 1 8 5 1 8 5 1 8 5 1 8 5 1 8 5 ASRock A780GMH/128M Motherboard...
  • Page 166 ® ® ® ® ® ® 1 8 6 1 8 6 1 8 6 1 8 6 1 8 6 ASRock A780GMH/128M Motherboard...
  • Page 167 ® ® 1 8 7 1 8 7 1 8 7 1 8 7 1 8 7 ASRock A780GMH/128M Motherboard...
  • Page 168 1 8 8 1 8 8 1 8 8 1 8 8 1 8 8 ASRock A780GMH/128M Motherboard...
  • Page 169 DDRII_1 DDRII_2 DDRII_3 DDRII_4 1 8 9 1 8 9 1 8 9 1 8 9 1 8 9 ASRock A780GMH/128M Motherboard...
  • Page 170 1 9 0 1 9 0 1 9 0 1 9 0 1 9 0 ASRock A780GMH/128M Motherboard...
  • Page 171 ® ® ® 1 9 1 1 9 1 1 9 1 1 9 1 1 9 1 ASRock A780GMH/128M Motherboard...
  • Page 172 1 9 2 1 9 2 1 9 2 1 9 2 1 9 2 ASRock A780GMH/128M Motherboard...
  • Page 173 SATAII_5 SATAII_6 (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 SATAII_4 (PORT 0) (PORT 1) (PORT 2) (PORT 3) 1 9 3 1 9 3 1 9 3 1 9 3 1 9 3 ASRock A780GMH/128M Motherboard...
  • Page 174 1 9 4 1 9 4 1 9 4 1 9 4 1 9 4 ASRock A780GMH/128M Motherboard...
  • Page 175 1 9 5 1 9 5 1 9 5 1 9 5 1 9 5 ASRock A780GMH/128M Motherboard...
  • Page 176 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 1 9 6 1 9 6 1 9 6 1 9 6 1 9 6 ASRock A780GMH/128M Motherboard...
  • Page 177 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 1 9 7 1 9 7 1 9 7 1 9 7 1 9 7 ASRock A780GMH/128M Motherboard...
  • Page 178 ® ® 1 9 8 1 9 8 1 9 8 1 9 8 1 9 8 ASRock A780GMH/128M Motherboard...
  • Page 179 1 9 9 1 9 9 1 9 9 1 9 9 1 9 9 ASRock A780GMH/128M Motherboard...

This manual is also suitable for:

A780gmh/128m

Table of Contents