Download Print this page

Room & Board Durant Installation Instructions

Mirror/cabinet

Advertisement

Quick Links

Durant Mirror/Cabinet Installation Guide
WARNINGS
• For safe installation, it is imperative to use wall anchors appropriate to your wall type.
• Installing on wood studs is recommended. We have also provided information for installing on drywall.
• Improper installation can result in serious injury.
SPECIAL CONSIDERATIONS
• We highly recommend two people install the Durant mirror/cabinet.
• Professional installation recommended.
• It is important to use a level throughout the installation so that the wall cleats rest evenly and
perfectly horizontal to one another. If the cleats attached to the mirror/cabinet and the cleats
attached to the wall are not level, Durant will not hang securely on the wall.
RECOMMENDED TOOLS
FOR PROPER INSTALLATION
• Tape measure or ruler (at least 3 feet long)
• Level
• Power drill
INSTRUCTIONS
BEFORE YOU BEGIN:
Due to the handcrafted nature of Durant, there may be slight variances between each mirror/cabinet and its bracket
placements, which is why it is very important to take precise measurements for each mirror/cabinet you install.
Locate your desired location for
the top of the mirror/cabinet. Hold
the mirror/cabinet there using a
level to ensure even placement
and mark on your wall the top and
corners of the mirror/cabinet, as
seen in the thick line in Figure 1.
4600 Olson Memorial Highway
|
Minneapolis, Minnesota 55422
INSTALLATION INSTRUCTIONS
Keep these instructions for future use
INCLUDED
• Durant mirror/cabinet
• Attached wall cleats (2)
• Detached wall cleats (2)
• Screws (6)
• Drywall anchors (6)
Figure 1
|
www.roomandboard.com
3/15/19
|
800.301.9720

Advertisement

loading
Need help?

Need help?

Do you have a question about the Durant and is the answer not in the manual?

Questions and answers

Summary of Contents for Room & Board Durant

  • Page 1 INSTRUCTIONS BEFORE YOU BEGIN: Due to the handcrafted nature of Durant, there may be slight variances between each mirror/cabinet and its bracket placements, which is why it is very important to take precise measurements for each mirror/cabinet you install. ➊...
  • Page 2 Set the mirror/cabinet down on a soft, stable surface so the brackets are facing you. Slide the detached brackets into the attached brackets and hold them in place. See Figure 2 for detail of how they fit together. The side labeled “Durant” is the front of the mirror/cabinet; you will be facing the side labeled “Wall.”...