Advertisement
FLOAT SHELF & FLOAT BOX SHELF
RECOMMENDED TOOLS AND MATERIALS:
Level
3/16" Drill bit
THIS PRODUCT INCLUDES:
A.
B.
A. - Float shelf
B. - Mounting bracket
C. - Mounting screws
SPECIAL CONSIDERATIONS:
The maximum recommended load for this product is 20 pounds. If you are mounting this shelf to a surface
other than drywall, or if you are uncertain about assembly, please contact a professional for help with
installation.
ASSEMBLY INSTRUCTIONS
Keep these instructions for future use
#2 Phillips screwdriver
Power drill
D. - Wall anchors
E. - Set screws
Pencil
C.
D.
(hardware not to scale)
E.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Room & Board FLOAT SHELF
Summary of Contents for Room & Board FLOAT SHELF
- Page 1 ASSEMBLY INSTRUCTIONS Keep these instructions for future use FLOAT SHELF & FLOAT BOX SHELF RECOMMENDED TOOLS AND MATERIALS: Level #2 Phillips screwdriver Pencil 3/16” Drill bit Power drill THIS PRODUCT INCLUDES: (hardware not to scale) A. - Float shelf D. - Wall anchors B.
- Page 2 Note: Pre-drilled holes face up Place the mounting bracket against your wall at the desired location. Use a level to ensure accurate placement. Ensure the mounting bracket is oriented in correspondence with the “up” arrow. Use a pencil to mark the location of each of the mounting holes. It is recommended that at least one of the holes be centered over a stud.
Need help?
Do you have a question about the FLOAT SHELF and is the answer not in the manual?
Questions and answers