Avantco 194MCF322A User Manual
Avantco 194MCF322A User Manual

Avantco 194MCF322A User Manual

Modular ice machines
Hide thumbs Also See for 194MCF322A:

Advertisement

Modular Ice Machines
Models:
#194MCF322A
#194MCH322A
#194MCF422A
#194MCH422A
#194MCF430A
#194MCH430A
#194MCF530A
#194MCH530A
#194KMCF322BA
#194KMCH322BA
Note:
Read this manual in its entirety prior to equipment setup, operation, and maintenance.
www.AvantcoIce.com
#194KMCF422BA
#194KMCH422BA
#194KMCF430BA
#194KMCH430BA
#194KMCF530BA
#194KMCH530BA
#194BIN23022
#194BIN27530
#194KMCF322LA
#194KMCH322LA
User Manual
#194KMCF422LA
#194KMCH422LA
#194KMCF430LA
#194KMCH430LA
#194KMCF530LA
#194KMCH530LA
#194BIN40022
#194BIN54030
#194KMCF322HA
#194KMCH322HA
03/2024
#194KMCF422HA
#194KMCH422HA
#194KMCF430HA
#194KMCH430HA
#194KMCF530HA
#194KMCH530HA
#194HBN12022
#194HBN18030
#194ADAP2230

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 194MCF322A and is the answer not in the manual?

Questions and answers

Summary of Contents for Avantco 194MCF322A

  • Page 1 User Manual 03/2024 Modular Ice Machines Models: #194MCF322A #194KMCF422BA #194KMCF422LA #194KMCF422HA #194MCH322A #194KMCH422BA #194KMCH422LA #194KMCH422HA #194MCF422A #194KMCF430BA #194KMCF430LA #194KMCF430HA #194MCH422A #194KMCH430BA #194KMCH430LA #194KMCH430HA #194MCF430A #194KMCF530BA #194KMCF530LA #194KMCF530HA #194MCH430A #194KMCH530BA #194KMCH530LA #194KMCH530HA #194MCF530A #194BIN23022 #194BIN40022 #194HBN12022 #194MCH530A #194BIN27530 #194BIN54030 #194HBN18030 #194KMCF322BA...
  • Page 2: Table Of Contents

    User Manual Modular Ice Machines Contents Warnings ................................ 3 Installation ..............................4 Startup and Operation ..........................9 Operating Instructions ..........................10 Control Panel ..............................11 Other Special Protection - Shutdown .....................12 Cleaners / Sanitizers ...........................15 Maintenance ..............................16 Cleaning Instructions ..........................17 Service Call ..............................21 Troubleshooting ............................22 Hotel Ice Dispenser User's Manual ......................23 General Information ...........................
  • Page 3: Warnings

    User Manual Modular Ice Machines Warnings DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING. PELIGRO – RIESGO DE INCENDIO O EXPLOSION. REFRIGERANTE INFLAMABLE UTILIZADO. PARA SER REPARADO SOLAMENTE POR PERSONAL DE SERVICIO CALIFICADO.
  • Page 4: Installation

    User Manual Modular Ice Machines Installation This product cannot be used in outdoor environments. Not intended for use by children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. • The installation, repair, or maintenance of this ice machine must be carried out by professional and qualified personnel.
  • Page 5 The water filters below are approved for use with Avantco Ice Machines. Failure to use and maintain an appropriate water filter will void warranty coverage on your Avantco Ice Machine. For installation instructions, refer to the C Pure water filtration manual or contact a C Pure water filtration dealer.
  • Page 6 User Manual Modular Ice Machines Modular Ice Machines with Bin Ice Production Per Replacement Item Number Ice Shape Filtration System Cartridge 24 Hrs. 194KMCF322BA Full Dice 344 lb. 790OCLOKITM 790OCLOCARTM 194KMCH322BA Half Dice 350 lb. 790OCLOKITM 790OCLOCARTM 194KMCF422BA Full Dice 399 lb.
  • Page 7 User Manual Modular Ice Machines Installation The ice machine should be installed in a proper location meeting the following conditions: • Power supply: The rated voltage indicated on the machine nameplate ±6%. • Water source: Potable water, with water pressure from 18.75 PSI to 80 PSI; water temperature: 90°F. •...
  • Page 8 NOTE: The filter flow direction should be correctly installed as per the direction marker on the filter head cover or the filter body. The filter cartridge should be replaced every 3 to 6 months. Installing an Adapter Item Number Adapter Bin Options 194BIN27530, 194MCF322A 194ADAP2230 194BIN54030 194BIN27530, 194MCH322A 194ADAP2230 194BIN54030...
  • Page 9: Startup And Operation

    User Manual Modular Ice Machines How to Use 194ADAP2230: 1. Place 194ADAP2230 on top of your 30" ice bin. 2. Once the adapter is on the ice bin, place your 22" ice machine on top of the adapter. 3. Nothing else is required for set-up. If preferred, you can seal the adapter to the ice machine with a gasket. Startup and Operation 1.
  • Page 10: Operating Instructions

    User Manual Modular Ice Machines Operating Instructions • Startup: After proper installation, connect the water source and turn on the power supply to turn on the machine. Confirm that the machine is operating normally when you turn it on for the first time. •...
  • Page 11: Control Panel

    User Manual Modular Ice Machines Control Panel LED Display: • INIT or Self-check: Displays "ini" code. • PREP. or Preparing: Counts (in seconds) forwards. • MAKE or Ice making: Counts (in seconds) forwards prior to the water reaching 32°F. Counts seconds backwards to 0 seconds afterwards.
  • Page 12: Other Special Protection - Shutdown

    User Manual Modular Ice Machines Other Special Protection - Shutdown • If the ice machine has not detected ice harvest in three cycles, it will shut down for safety and protection. The ice maker needs to be checked. • If the ice machine detects that the ambient temperature is too high, it will stop for safety and protection. •...
  • Page 13 User Manual Modular Ice Machines Code Cause How to Fix Machine Action If the unit can make ice after restarting the machine: There is scale buildup in the evaporator. Clean the evaporator. Ice being made is too thin or too thick. Adjust the ice thickness setting. When a new batch of ice drops from the evaporator, does the timer on the display panel reset to counting from 0? If not, and the timer keeps counting up, this means that the ice full sensor is not sensing the batch of...
  • Page 14 User Manual Modular Ice Machines Code Cause How to Fix Machine Action Verify probe wires have a good connection in the controller by disconnecting Does not shutdown. probe leads from controller and reconnecting leads to controller. Cond. Temp. Sensor Error LED light on Open Fault Use a multimeter set to Ohm setting and verify resistance valve of the probe every 5 seconds...
  • Page 15: Cleaners / Sanitizers

    Noble Chemical offers a full line of products to clean and sanitize your commercial ice machine. These chemicals are approved for use with Avantco Ice Machines. Failure to regularly clean and sanitize your Avantco Ice Machine will void warranty coverage. For information and instructions, contact a Noble Chemical dealer. The ice machine needs to be cleaned every other month, or once a month for high yeast environments.
  • Page 16: Maintenance

    User Manual Modular Ice Machines Maintenance NOTE: Maintenance must be done by a qualified technician. WARNING: Before maintenance or manual cleaning, be sure to shut off the water source and power supply. Exterior Cleaning • Frequently clean the environment around the ice machine to keep it clean. Do not block the vents. •...
  • Page 17: Cleaning Instructions

    • Throw away the next batch of ice in case of residual cleaner. 4-6 Month Manual Cleaning & Sanitizing See our step-by-step video on how to clean your Avantco Ice Machine. Remove all ice from the ice bin 2. Remove the 4 screws from 3.
  • Page 18 User Manual Modular Ice Machines 4. Make sure the power supply is 5. Remove the water curtain. 6. Remove the 2 screws that cut off. secure the spray pipe. Remove the spray pipe. 7. Remove the 2 screws that 8. Pull out inlet water pipe. 9.
  • Page 19 User Manual Modular Ice Machines 12. After soaking, scrub the spray pipe, water curtain, and pump base bracket with cleaning solution and rinse with clean water. 13. Spray the cleaning solution into the evaporator and wipe clean. Repeatedly wipe the water tank, ice plate and its plastic parts, side plates, ice buckets, and other sanitary areas with cleaning solution.
  • Page 20 User Manual Modular Ice Machines Sanitizing Instructions Mix a solution of sanitizer and water according to your ice machine sanitizer instructions. Ensure the sanitizer dissolves completely. Soak the water pipe, inner and outer spray pipe, head spray pipe fixing seat and screws in the solution for 5 minutes.
  • Page 21: Service Call

    User Manual Modular Ice Machines Service Call If the ice machine works abnormally, confirm below before making a service call: 1. Check the water supply. Check: • That there is water in the water trough. • That the water pressure is 18.75 PSI to 80 PSI; the water temperature is 40-90°F. •...
  • Page 22: Troubleshooting

    User Manual Modular Ice Machines Troubleshooting Symptom Probable Cause Possible Fix Ice machine not working. Power switch not turned on. Turn on the power switch. Indicator is OFF. Plug is loose. Check plug and socket. Shutdown every 3 minutes after startup. The ambient temperature is too high.
  • Page 23: Hotel Ice Dispenser User's Manual

    User Manual Hotel Ice Dispenser Hotel Ice Dispenser #194HBN12022 #194HBN18030 Note: Read this manual in its entirety prior to equipment setup, operation, and maintenance. www.AvantcoIce.com www.AvantcoIce.com...
  • Page 24: General Information

    Check the nameplate located on the back of the cabinet for specific information. Avantco Ice Machines assumes no liability or responsibility of any kind for products that have been altered in any way, including the use of any parts and/or other components not specifically approved by Avantco Ice Machines.
  • Page 25: Dimensioned Illustration

    User Manual Hotel Ice Dispenser 194HBN18030 Dimensioned Illustration 24.1 451.1 17 ¾" 1" Power Cord Water Inlet ⅜ Flare (Water Filler Only) 609.6 762.4 444.4 24" 30" 17 ½" 451.1 ¾ FPT 17 ¾" Drain Ice Head Ice Head 189.4 189.7 7 ½"...
  • Page 26 User Manual Hotel Ice Dispenser 194HBN12022 Dimensioned Illustration 406.4 16" 24.1 1" Power Cord 558.8 609.6 22" 24" 179.1 ¾ FPT 7" Ice Head Ice Head Drain 88.9 3 ½" 711.2 28" Back Note: Ice fill station depth is curved to match large ice buckets.
  • Page 27: Product Description

    User Manual Hotel Ice Dispenser Product Description All models consist of a plastic-lined, insulated hopper mounted to a metal base. The hopper contains a 15-blade plastic dispense wheel and a stainless steel sweep arm. The top front of the hopper has a removable door to facilitate maintenance and cleaning of the hopper without removal of the ice machine.
  • Page 28: Unpacking

    User Manual Hotel Ice Dispenser Unpacking After removing the carton, check for the loose-shipped parts packed in the storage bin. The parts will include a carton with four legs. Remove the leg carton and any other loose-shipped items. To remove the pallet, place part of the carton behind the unit and tip the unit on its back. Remove the bolts holding the pallet to the base of the HBN dispenser and separate the pallet from the unit.
  • Page 29: Installation

    User Manual Hotel Ice Dispenser Installation - Plumbing DRAIN All models of the dispenser have a ¾" FPT drain fitting at the bottom of the back panel. Connect ¾" rigid tubing to this connection. A vent is recommended for most installations. Route the drain tubing to the building drain. Note: Drain fitting material is plastic.
  • Page 30 User Manual Hotel Ice Dispenser Installation - Electrical & Ice Machine Assembly The dispenser is supplied with a power cord. Do not use with an extension cord. The unit must be plugged into a properly grounded outlet. The dispenser must be installed so that it is a separate piece of equipment from the ice machine. The drains and electrical supply must be separate.
  • Page 31 User Manual Hotel Ice Dispenser Final Checklist / Initial Startup 1. Check that electrical power has been supplied. 2. Check that a drain, separate from the ice machine, insulated and made of rigid tubing, has been connected to the dispenser. 3.
  • Page 32 User Manual Hotel Ice Dispenser Push the chute back to dispense ice. www.AvantcoIce.com...
  • Page 33: General Care And Cleaning

    User Manual Hotel Ice Dispenser General Care and Cleaning Periodically inspect and clean the ice dispenser to keep it operating at peak performance. Wash the outside of the dispenser with warm water and soap. Rinse out and wipe dry. Cleaning and Sanitizing of the Ice Storage Bin: The minerals, chlorine, and other impurities in the water are rejected from the water during the freeze cycle of the ice machine.
  • Page 34 User Manual Hotel Ice Dispenser General Care and Cleaning (cont.) 10. Rinse all areas washed with clean, fresh water. 11. Using the ice machine cleaning solution, clean the ice grill, sink, sweep arm, and dispense wheel. Rinse these parts with clean, fresh water. 12.
  • Page 35: Maintenance

    User Manual Hotel Ice Dispenser Maintenance Spilled ice and user debris will collect in the ice catch pan, located just below the sink grill. Occasionally, the debris will need to be removed and drained out to prevent water backups. Note: Failure to clean out the ice catch pan will likely result in a leak one that is NOT covered by warranty. To clean out the ice catch pan: 1.
  • Page 36: Adjustments

    User Manual Hotel Ice Dispenser Adjustments The dispenser is preset at the factory. Adjustments are rarely needed. Agitation Time Recommendations: The standard time is 3 seconds on every 6 hours. Adjust to agitate more frequently if the unit is installed in a low temperature environment.
  • Page 37: Troubleshooting

    User Manual Hotel Ice Dispenser Troubleshooting Symptom Probable Cause Possible Fix Check for proper power. Is dispenser plugged No power to dispenser. No ice. Check ice machine. Check vend switch. Vend switch does not close. Check chute for proper motion. Chute cannot be pushed back.

Table of Contents

Save PDF