Download Print this page
Nokia RH-53 Disassembly Instructions Manual
Nokia RH-53 Disassembly Instructions Manual

Nokia RH-53 Disassembly Instructions Manual

Hide thumbs Also See for RH-53:

Advertisement

Quick Links

Nokia Customer Care
RH-53/54
6-Disassembly and
Assembly Instructions
Copyright © 2004 Nokia Corporation. All rights Reserved
ISSUE 1 09/2004

Advertisement

loading
Need help?

Need help?

Do you have a question about the RH-53 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nokia RH-53

  • Page 1 Nokia Customer Care RH-53/54 6-Disassembly and Assembly Instructions Copyright © 2004 Nokia Corporation. All rights Reserved ISSUE 1 09/2004...
  • Page 2 RH-53/54 Nokia Customer Care 6-Disassembly and Assembly Instructions [This page left intentionally blank] COMPANY CONFIDENTIAL ISSUE 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved.
  • Page 3 RH-53/54 6-Disassembly and Assembly Instructions Nokia Customer Care Table of Contents Page No RH-53/54 Disassembly..................5 Domesheet Exchange instructions ..............12 RH-53/54 Reassembly..................14 ISSUE 1 09/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
  • Page 4 RH-53/54 Nokia Customer Care 6-Disassembly and Assembly Instructions [This page left intentionally blank] COMPANY CONFIDENTIAL ISSUE 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved.
  • Page 5 3.) When removing the Flash Adapter, press the locking 4.) Take away the unit now. as shown in the picture. ISSUE 1 09/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
  • Page 6 5.) A-Face Assy is attached with snaps to the B-Cover 6.) Shift the A-Face Assy from the B-Cover as shown in Lower Block. Release the two snaps first. the picture. COMPANY CONFIDENTIAL ISSUE 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved.
  • Page 7 11.) Unscrew the four Torx Plus size 6 screws of Lower ® Block. For assembly, the reverse order and a Torx Plus driver with a torque of 27Ncm has to be used. ISSUE 1 09/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
  • Page 8 16.) Placement of the Coax Cable in the Upper Block. Chamber. 18.) Open the Coax Connector of the Engine Module 19.) Note the exactly position when laying the Coax carefully by using tweezers. Cable during assembly. COMPANY CONFIDENTIAL ISSUE 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved.
  • Page 9 24.) Now, open the Connector carefully. 25.) Separate the Modules. 26.) Open the hooks before removing the Plastic Hinge. 27.) Take care not to damage the Flex Connector when removing the Plastic Hinge. ISSUE 1 09/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
  • Page 10 34.) Place the SRT-6 between LCD and the LCD Can as 35.) Release the four springs of Key Dome Shield. shown in the picture and lever out the LCD carefully. COMPANY CONFIDENTIAL ISSUE 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved.
  • Page 11 36.) Now, the Key Dome Shield can be removed. 37.) The Engine Module can be removed easily. 38.) System Connector and Microphone drop out when turning the Shielding Can. ISSUE 1 09/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
  • Page 12 4.) Place the Domesheet in the Key Dome Shield. 5.) Place the Dome Sheet straps into the slot of the Key 6.) Same procedure on the opposite side. Dome Shield. COMPANY CONFIDENTIAL ISSUE 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved.
  • Page 13 Check if the Domesheet is correctly stuck to the Engine Module. 7.) Remove the Key Dome Shield again. 8.) Press on the Domesheet carefully. Ensure also, that there are no open edges or air gap. ISSUE 1 09/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
  • Page 14 RH-53/54 Nokia Customer Care 6-Disassembly and Assembly Instructions RH-53/54 Reassembly The reassembly takes place in reversed order. COMPANY CONFIDENTIAL ISSUE 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved.

This manual is also suitable for:

Rh-54