ASROCK 775DUAL-VSTA User Manual page 8

CAUTION!
1. About the setting of "Hyper Threading Technology", please check page 32.
2. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 28 for details.
3. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 17 for proper installation.
4. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
5. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
6. For the information of the compatible PCI Express VGA cards, please
refer to the "Supported PCI Express VGA Card List for PCI Express
Graphics Slot" on page 10. For the proper installation of PCI Express VGA
card, please refer to the installation guide on page 19.
7. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
8. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-channel,
6-channel, and 8-channel modes. Please check the table on page 12 for
proper connection.
9. Power Management for USB 2.0 works fine under Microsoft
Vista TM / XP 64-bit / XP SP1 or SP2 / 2000 SP4.
10. Microsoft ® Windows ® Vista
website in the future. Please visit our website for Microsoft
driver and related information. ASRock website
TM driver is not ready yet. We will update it to our
http://www.asrock.com
8 8 8 8 8
® Windows ®
® Windows ® Vista TM