ASROCK 775DUAL-880PRO User Manual
Hide thumbs Also See for 775DUAL-880PRO:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
Copyright©2006 ASRock INC. All rights reserved.
ASRock 775Dual-880Pro Motherboard
Published January 2006
1 1 1 1 1

Advertisement

Table of Contents
loading

Summary of Contents for ASROCK 775DUAL-880PRO

  • Page 1 Disclaimer: Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide.
  • Page 2: Motherboard Layout

    North Bridge Controller Clear CMOS Jumper (CLRCMOS1) CPU Fan Connector (CPU_FAN1) USB 2.0 Header (USB45, Blue) 2 x 240-pin DDRII DIMM Slots USB 2.0 Header (USB67, Blue) (Dual Channel A: DDRII1, DDRII2; Yellow) Floppy Connector (FLOPPY1) 2 x 184-pin DDR DIMM Slots Game Connector (GAME1) (Dual Channel B: DDR1, DDR2;...
  • Page 3 PS/2 Mouse Port (Green) Front Speaker (Lime) If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use. TABLE for Audio Output Connection...
  • Page 4: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.
  • Page 5: Specifications

    1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications Platform: ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm CPU: 775-Pin Socket supporting Intel ® Pentium ® 4 / Celeron ® processor (in 775-land LGA package) Chipsets:...
  • Page 6 To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard! It may cause permanent damage! For the information of the compatible AGP VGA cards, please refer to the “Supported AGP VGA Card List for...
  • Page 7 AGP Slot” on page 8 and 9. For the proper installation of PCI Express VGA card, please refer to the installation guide on page 16. For the information of the compatible PCI Express VGA cards, please refer to the “Supported PCI Express VGA Card List for PCI Express Graphics Slot”...
  • Page 8: Supported Agp Vga Card List For Agp Slot

    Supported AGP VGA Card List for AGP Slot Supported AGP VGA Card List for AGP Slot Supported AGP VGA Card List for AGP Slot Supported AGP VGA Card List for AGP Slot Supported AGP VGA Card List for AGP Slot (for Windows 2000/Windows XP) I.
  • Page 9 Club3D Radeon 9800 ASUS A9800XT ASUS X800 GEXCUBE GC-RX700PGA-C3 For the latest updates of the supported AGP VGA card list for AGP slot, please visit ASRock website for details. ASRock website: http://www.asrock.com/support/index.htm 9 9 9 9 9 ASRock 775Dual-880Pro Motherboard...
  • Page 10: Supported Pci Express Vga Card List For Pci Express Graphics Slot

    ASUS EAX600XT/HTVD ABIT X600XT ASUS EAX700PRO/TVD ASUS EAX800XL MSI X800XT GECUBE X850XT-VIVO For the latest updates of the supported PCI Express VGA card list for PCI Express Graphics slot, please visit ASRock website for details. ASRock website: http://www.asrock.com/support/index.htm ASRock 775Dual-880Pro Motherboard...
  • Page 11: Pre-Installation Precautions

    Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 12 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion.
  • Page 13: Installation Of Cpu Fan And Heatsink

    1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS.
  • Page 14: Installation Of Memory Modules (Dimm)

    Technology. For dual channel configuration, you always need to install identi- cal (the same brand, speed, size and chip-type) DDR DIMM pair in the slots of the same color. In other words, you have to install identical DDR DIMM pair in Dual Channel A (DDRII1 and DDRII2;...
  • Page 15: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. STEP 2: Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 16: Expansion Slots (Pci, Agp, And Pci Express Graphics Slots)

    PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.
  • Page 17: Jumpers Setup

    Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power supply. (see p.2 No. 24) (see p.2 No. 24) Note: If the JL1 and JR1 jumpers are short, both the front panel and the rear panel audio connectors can work. Clear CMOS (CLRCMOS1, 2-pin jumper) 2-pin jumper (see p.2 No.
  • Page 18: Onboard Headers And Connectors

    FDD Connector (33-pin FLOPPY1) (see p.2 No. 21) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE Connector (Blue) Secondary IDE Connector (Black) (39-pin IDE1, see p.2 No. 10) (39-pin IDE2, see p.2 No.
  • Page 19 ASRock 8CH I/O provides you 4 ready-to-use USB 2.0 ports on (9-pin USB67) the rear panel. If the rear USB (see p.2, No. 20) ports are not sufficient, this USB 2.0 header is available to support 2 extra USB 2.0 ports.
  • Page 20 Please note that it is necessary to connect a power supply with (4-pin ATX12V1) ATX 12V plug to this connector (see p.2, No. 2) so that it can provides sufficient power. Failing to do so will cause the failure to power up. ASRock 775Dual-880Pro Motherboard...
  • Page 21 STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA connector. STEP 4: Connect the other end of the SATA data cable to the SATA hard disk. 2.9 Hot Plug and Hot Swap F Hot Plug and Hot Swap F...
  • Page 22: Installing Windows 2000 / Windows Xp / Windows Xp 64-Bit With Raid Functions

    Windows XP 64-bit With RAID Functions Windows XP 64-bit With RAID Functions If you want to install Windows 2000 / Windows XP / Windows XP-64bit OS on your system with RAID functions, please refer to the below methods for proper installation according to the different Windows OS versions.
  • Page 23: Installing Windows Xp 64-Bit With Raid Functions

    Support CD, “Guide to SATA Hard Disks Installation and RAID Configuration”, which is located in the folder at the following path: .. \ SATA RAID BIOS and the document in the support CD, “Guide to VIA RAID Tool”, which is located in the folder at the following path: ..
  • Page 24 Without RAID Functions If you want to install Windows 98 / ME / 2000 / XP / XP 64-bit on your SATA HDDs without RAID functions or you want to install Windows 98 / ME / 2000 / XP / XP 64-bit on your IDE HDDs instead of SATA HDDs, please refer to the below methods for proper installation according to the different Windows OS versions.
  • Page 25: Bios Information

    ME / 2000 / XP. The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features. To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.EXE”...
  • Page 26 ASRock 775Dual-880Pro Motherboard...
  • Page 27 ASRock 775Dual-880Pro Motherboard...
  • Page 28 ® ® ASRock 775Dual-880Pro Motherboard...
  • Page 29 ASRock 775Dual-880Pro Motherboard...
  • Page 30 ASRock 775Dual-880Pro Motherboard...
  • Page 31 ASRock 775Dual-880Pro Motherboard...
  • Page 32 ASRock 775Dual-880Pro Motherboard...
  • Page 33 DDRII1 DDR1 DDRII2 DDR2 ASRock 775Dual-880Pro Motherboard...
  • Page 34 “ ” ASRock 775Dual-880Pro Motherboard...
  • Page 35 ASRock 775Dual-880Pro Motherboard...
  • Page 36 “ ” SATA1 SATA2 ASRock 775Dual-880Pro Motherboard...
  • Page 37 ASRock 775Dual-880Pro Motherboard...
  • Page 38 ASRock 775Dual-880Pro Motherboard...
  • Page 39 ASRock 775Dual-880Pro Motherboard...
  • Page 40 ASRock 775Dual-880Pro Motherboard...
  • Page 41 ASRock 775Dual-880Pro Motherboard...
  • Page 42 ASRock 775Dual-880Pro Motherboard...
  • Page 43 ® ® “LGA 775 CPU Installation Live Demo” ASRock 775Dual-880Pro Motherboard...
  • Page 44 Wir danken Ihnen für den Kauf des ASRock 775Dual-880Pro Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 45: Spezifikationen

    1.2 Spezifikationen Plattform: ATX-Formfaktor: 30.5 cm x 24.4 cm; 12.0 Zoll x 9.6 Zoll CPU: Unterstützt 775-Pin Socket für Intel Pentium 4 / Celeron Prozessor (in 775-land LGA Paket) Chipsatz: North Bridge: VIA PT880Pro, FSB @ 1066/800/533 MHz, unterstützt Hyper-Threading Technology...
  • Page 46 (siehe VORSICHT 7) ASRock 8CH I/O: 1 PS/2-Mausanschluss, 1 PS/2-Tastaturanschluss, 1 VGA Port, 1 paralleler port: Unterstützung für ECP / EPP, 4 hintere USB 2.0-Ports, 1 RJ 45 port, Audiobuchse: Lautsprecher hinten / Lautsprecher seitlich / Mitte/Bass / Audioeingang/ Lautsprecher vorne / Mikrofon...
  • Page 47 Informationen über kompatible AGP VGA-Karten finden Sie in der “Liste unterstützter AGP VGA-Karten” auf den Seiten 8, 9. (Nur Englisch) Die richtige Installation der AGP ist in der Installationsanleitung auf Seite 54 angegeben. Informationen über kompatible PCI Express VGA-Karten finden Sie in der “Liste unterstützter PCI Express VGA-Karten”...
  • Page 48 Bevor Sie die 775-Pin CPU in den Sockel sitzen, prüfen Sie bitte, ob die CPU-Oberfläche sauber ist und keine der Kontakte verbogen sind. Setzen Sie die CPU nicht mit Gewalt in den Sockel, dies kann die CPU schwer beschädigen. ASRock 775Dual-880Pro Motherboard...
  • Page 49 Pin1 Orientierungskerbe Orientierungskerbe 775-Pin Sockel 775-Pin CPU Um die CPU ordnungsgemäß einsetzen zu können, richten Sie die zwei Orientierungskerben der CPU mit den beiden Markierungen des Sockels aus. Schritt 2-3. Drücken Sie die CPU vorsichtig in vertikaler Richtung in den Sockel.
  • Page 50 Kappe drücken, um ein Entfernen zu erleichtern. 1. Verwenden Sie beim Entfernen die Kappenlasche und vermeiden Sie ein Abreißen der PnP-Kappe. 2. Diese Kappe muss angebracht werden, falls Sie das Motherboard zur Reparatur bringen. Schritt 4. Sockel schließen: Schritt 4-1. Drehen Sie die Ladeplatte auf den Kühlkörper (IHS).
  • Page 51 Installation des CPU-Lüfters und Kühlkörpers Für Installationshinweise, siehe Betriebsanleitung Ihres CPU-Lüfters und Kühlkörpers. Unten stehend ein Beispiel zur Installation eines Kühlkörpers für den 775-Pin CPU. Schritt 1. Geben Sie Wärmeleitmaterial auf die Mitte (Tragen Sie Wärmeleitmaterial auf. ) des IHS, auf die Sockeloberfläche.
  • Page 52 Worten, Sie müssen ein identisches Paar DDR DIMMs in Doppelkanal A (DDRII1 und DDRII2; gelbe Steckplätze; siehe S. 2 Nr. 6) oder ein identisches Paar DDR DIMMs in Doppelkanal B (DDR1 und DDR2; blaue Steckplätze; siehe S. 2 Nr. 7) installieren, damit die Doppelkanal-Speichertechnologie aktiviert werden kann.
  • Page 53 Öffnen Sie einen DIMM-Slot, indem Sie die seitlichen Clips nach außen drücken. Schritt 2: Richten Sie das DIMM-Modul so über dem Slot aus, dass das Modul mit der Kerbe in den Slot passt. Die DIMM-Module passen nur richtig herum eingelegt in die Steckplätze.
  • Page 54 Express Grafik-Slots): Express Grafik-Slots): Express Grafik-Slots): Express Grafik-Slots): Es stehen 4 PCI-, 1 AGP-, und 1 PCI Express Grafik-Slot auf dem 775Dual-880Pro Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. AGP-Slot: Der AGP-Steckplatz dient zur Installation einer Grafikkarte. Der ASRock AGP-Steckplatz hat speziell entwickelte Klammern, die die eingefügte Grafikkarte sicher festhalten.
  • Page 55: Einstellung Der Jumper

    (siehe S.2 - Nr. 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. (siehe S.2 - Nr. 24) (siehe S.2 - Nr. 24) Hinweis: Sind die Jumper JL1 und JR1 gesetzt funktionieren beide Audioanschlüsse, Front- und Rückseite.
  • Page 56 Floppy-Laufwerk (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2 - Nr. 21) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) Sekundärer IDE-Anschluss (schwarz) (39-pin IDE1, siehe S.2 - Nr. 10) (39-pin IDE2, siehe S.2 - Nr.
  • Page 57 Serial ATA- (SATA-) Sie können beide Enden des Datenkabel SATA-Datenkabels entweder mit der SATA-Festplatte oder dem SATA-Anschluss am Mainboard verbinden. Serial ATA- (SATA-) Verbinden Sie das schwarze Stromversorgungskabel Ende des SATA-Netzkabels mit dem Netzanschluss am Laufwerk. (Option) Verbindung zum Verbinden Sie dann das weiße...
  • Page 58 Interne Audio-Anschlüsse Diese ermöglichen Ihnen Stereo-Signalquellen, wie z. B. (4-Pin CD1) CD-ROM, DVD-ROM, TV-Tuner (CD1: siehe S.2 - No. 25) oder MPEG-Karten mit Ihrem System zu verbinden. Anschluss für Audio auf Dieses Interface zu einem der Gehäusevorderseite Audio-Panel auf der Vorderseite Ihres Gehäuses, ermöglicht...
  • Page 59 Verbinden Sie die ATX- Stromversorgung mit diesem (20-pin ATXPWR1) Header. (siehe S.2 - No. 29) Anschluss für Beachten Sie bitte, dass Sie eine 12V-ATX-Netzteil Stromversorgung mit ATX 12- Volt-Stecker mit diesem (4-pin ATX12V1) Anschluss verbinden müssen, (siehe S.2 - No. 2) damit ausreichend Strom geliefert werden kann.
  • Page 60 Hot-Plug- und Hot-Swap-F Hot-Plug- und Hot-Swap-Funktion für SA Hot-Plug- und Hot-Swap-F unktion für SA unktion für SA unktion für SAT T T T T A A A A A -F -F -F -F -Festplatten estplatten estplatten estplatten Hot-Plug- und Hot-Swap-F Hot-Plug- und Hot-Swap-F unktion für SA...
  • Page 61 RAID-Funktionalität installieren RAID-Funktionalität installieren RAID-Funktionalität installieren RAID-Funktionalität installieren Wenn Sie in Ihrem System ein Windows 2000- / Windows XP- / Windows XP- 64Bit-Betriebssystem mit RAID-Funktionalität installieren möchten, halten Sie sich bitte an die nachstehend aufgeführten Vorgehensweisen für die unterschiedlichen Windows-Betriebssystemversionen.
  • Page 62 Installation von Windows XP 64-Bit beginnen. Nach der Installation von Windows 2000 / Windows XP / Windows XP 64-Bit können Sie sowohl „SATA RAID BIOS“ als auch das „VIA RAID Tool“ zur RAID- Konfiguration und zur Verwaltung der RAID-Funktionalität verwenden. Bitte lesen Sie dazu das Dokument „Anleitung zur SATA-Festplatteninstallation und RAID-...
  • Page 63 Funktionalität installieren Funktionalität installieren Wenn Sie Windows 98 / ME / 2000 / XP / XP 64-Bit ohne RAID-Funktionalität auf Ihren SATA-Festplatten installieren oder Windows 98 / ME / 2000 / XP / XP 64-Bit statt auf SATA-Festplatten auf IDE-Festplatten installieren möchten, halten Sie sich bitte an die nachstehend aufgeführten Vorgehensweisen für die...
  • Page 64 CD information Dieses Motherboard unterstützt eine Reiche von Microsoft Windows Betriebssystemen: 98 SE / ME / 2000 / XP. Die Ihrem Motherboard beigefügte Support-CD enthält hilfreiche Software, Treiber und Hilfsprogramme, mit denen Sie die Funktionen Ihres Motherboards verbessern können Legen Sie die Support-CD zunächst in Ihr CD-ROM-Laufwerk ein.
  • Page 65: Contenu Du Paquet

    être trouvées dans le manuel l’utilisateur qui se trouve sur le CD d’assistance. Les spécifications de la carte mère et le BIOS ayant pu être mis à jour, le contenu de ce manuel est sujet à des changements sans notification.
  • Page 66: Spécifications

    Vitesse: 802.3u (Ethernet 10/100), support du Wake-On-LAN Surveillance Système: Mesure de la température CPU, Mesure de la température du châssis, Coupure auto du CPU en cas de surchauffe pour protéger le CPU (ASRock U-COP)(voir ATTENTION 4), Tachymètre de ventilateur CPU, Tachymètre de ventilateur de châssis, Surveillance du voltage: +12V, +5V, +3.3V, Vcore...
  • Page 67 Cette carte mère supporte la Technologie de Mémoire à Canal Double. Avant d’intégrer la Technologie de Mémoire à Canal Double, assurez- vous de bien lire le guide d’installation des modules mémoire en page 72 pour réaliser une installation correcte. Lorsqu’une surchauffe du CPU est détectée, le système s’arrête automatiquement.
  • Page 68 Cela pourrait l’endommager de manière définitive! Pour les informations concernant les cartes AGP VGA compatibles, veuillez vous reporter à la “Liste des cartes AGP VGA prises en charge” page 8, 9 (Anglais uniquement). Pour l’installation correcte de la carte AGP VGA, veuillez vous reporter au guide d’installation page 74.
  • Page 69 Vue d’ensemble du socket 775 broches Avant d’insérer le processeur 775 broches dans le socket, veuillez vérifier que la surface du processeur est bien propre, et qu’il n’y a aucune broche tordue sur le socket. Si c’est le cas, ne forcez pas pour insérer le processeur dans le socket.
  • Page 70 1. Il est recommandé d’utiliser la languette du capuchon ; évitez de faire sortir le capuchon PnP. 2. Ce capuchon doit être mis en place si vous renvoyez la carte mère pour service après vente. Etape 4. Refermez le socle : Etape 4-1.
  • Page 71 Répétez l’opération avec les autres attaches. Si vous enfoncez les attaches sans les faire tourner dans le sens des aiguilles d’une montre, le dissipateur thermique ne sera pas fixé sur la carte mère.
  • Page 72 DIMM DDR identiques sur la voie double A (DDRII1 et DDRII2; Slots jaunes; voir p.2 N°.6) ou une paire de DIMM DDR identiques sur la double voie B (DDR1 et DDR2; Slots bleus; voir p.2 N°.7), de sorte que la technologie mémoire double voie puisse être activée.
  • Page 73 Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Ayez bien le soin de débrancher l’alimentation avant d’ajouter ou de retirer des modules DIMM ou les composants du système. Etape 1. Déverrouillez un connecteur DIMM en poussant les taquets de maintien vers l’extérieur.
  • Page 74: Slots D'extension

    Graphiques) Graphiques) Graphiques) Il y a 4 slots PCI, 1 slot AGP, et 1 slot PCI Express Graphiques sur les cartes mères 775Dual-880Pro. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 75 2.5 “Surround Display” Grâce aux technologies PCI Express Graphiques brevetées d’ASRock, cette carte mère prend en charge la mise à niveau Affichage Surround. Avec la carte VGA AGP complémentaire externe et la carte PCI Express VGA, vous pouvez facilement profiter de la fonction Affichage Surround. Pour les instructions détaillées, veuillez vous reporter au document qui se trouve sur le chemin suivant...
  • Page 76 (FLOPPY1 br. 33) le côté avec fil rouge côté Broche1 (voir p.2 No. 21) Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) Connecteur IDE secondaire (noir) (39-pin IDE1, voir p.2 No.
  • Page 77 Câble de données L’une des deux extrémités du Série ATA (SATA) câble de données SATA peut être connectée au disque dur SATA ou au connecteur SATA sur la carte mère. Cordon d’alimentation Veuillez connecter l’extrémité noire Série ATA (SATA) du cordon d’alimentation SATA sur le connecteur d’alimentation de...
  • Page 78 Ils vous permettent de gérer des entrées audio à partir de sources (CD1 br. 4,) stéréo comme un CD-ROM, DVD- (CD1: voir p.2 No. 25) ROM, un tuner TV ou une carte MPEG. Connecteur audio panneau C’est une interface pour un câble avant audio en façade qui permet le...
  • Page 79 Cette section vous guidera pour l’installation des disques durs SATA. ETAPE 1 : Installez les disques durs SATA dans les baies pour disques de votre châssis. ETAPE 2 : Connectez le câble d’alimentation SATA au disque dur SATA.
  • Page 80 Qu’est-ce que la fonction « Hot Swap » ? Si les disques durs sont montés en configuration RAID1 l’action d’insérer et de retirer des disques SATA alors que le système est sous tension et en fonctionnement s’appelle le “Hot Swap” .
  • Page 81 XP 64 bits avec fonctions RAID dows XP 64 bits avec fonctions RAID Si vous voulez installer un système d’exploitation Windows 2000 / Windows XP / Windows XP 64 bits avec fonctions RAID sur votre système, veuillez vous reporter aux méthodes ci-dessous pour l’installation correcte en fonction des différentes versions du système d’exploitation Windows.
  • Page 82 “Guide d’installation des disques durs SATA et de configuration RAID, ” qui se trouve dans le dossier sur le chemin suivant : .. \ SATA RAID BIOS et le document sur le CD d’assistance, “Guide de l’Utilitaire VIA RAID pour Windows,” qui se trouve dans le dossier sur le chemin suivant : ..
  • Page 83 RAID bits sans fonctions RAID Si vous voulez installer Windows 98 / ME / 2000 / XP / XP 64 bits sur vos disques durs SATA sans les fonctions RAID ou si vous voulez installer Windows 98 / ME / 2000 / XP / XP 64 bits sur vos disques durs IDE au lieu de disques durs SATA, veuillez vous reporter aux méthodes ci-dessous pour l’installation correcte en...
  • Page 84 Cette carte mère supporte divers systèmes d’exploitation Microsoft Windows: 98 SE / ME / 2000 / XP. Le CD technique livré avec cette carte mère contient les pilotes et les utilitaires nécessaires pour améliorer les fonctions de la carte mère.
  • Page 85: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock 775Dual-880Pro, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Page 86 Slot PCI: 4 slot con PCI Spec 2.3 Slot AGP: 1 slot AGP, supporta scheda AGP a 1.5V, modelli 8X / 4X (vedi ATTENZIONE 5) Slot PCI Express Grafica: 1 slot PCI Express Grafica, supporta la scheda grafica PCI Ex press x 16 (vedi ATTENZIONE 6) USB 2.0:...
  • Page 87 Per il settaggio della “Tecnologia Hyper-Threading”, per favore controllare pagina 31 del Manuale dell’utente all’interno del CD di supporto. Controllare la tavola che segue per le frequenze di supporto di memoria e le loro corrispondenti frequenze CPU FSB. Frequenza CPU FSB...
  • Page 88 Questa scheda madre supporta l’ingresso stereo e mono per il microfono. Questa scheda madre supporta le modalità 2 canali, 4 canali, 6 canali e 8 canali per l’uscita audio. Controllare la tavola a pagina 3 per eseguire il collegamento appropriato.
  • Page 89 1. Si raccomanda di utilizzare la linguetta del cappuccio per la manipolazione ed evitare di far saltare via il cappuccio PnP. 2. Questo tappo deve essere inserito se se la scheda madre deve essere restituita per l’assistenza. Fase 4. Chiudere la presa: Fase 4-1.
  • Page 90 Ripetere la stessa operazione con gli altri fastener. Se si premono i fastener verso il basso, senza ruotarli in senso orario, il dissipatore non viene fissato bene alla scheda madre Fase 5. Collegare il cavo di alimentazione della ventola al connettore ventola della CPU sulla scheda madre.
  • Page 91 La scheda madre 775Dual-880Pro fornisce due slot DDR (Double Data Rate) DIMM 184 pin e due slot DDRII DIMM 240 pin, e supporta la tecnologia di memoria a doppio canale. Per la configurazione a doppio canale c’è sempre bisogno di installare una coppia identica di DDR DIMM (della stessa marca, velocità, dimensione e tipo di...
  • Page 92 Sbloccare lo slot DIMM premendo i fermi che lo trattengono verso l’esterno. Step 2. Allineare una DIMM sullo slot così che il pettine della DIMM combaci con la sua sede sullo slot. La DIMM può essere montata correttamente soltanto con un orientamento.
  • Page 93 Grafica) Grafica) Grafica) Grafica) Grafica) Esistono 4 slot PCI, 1 slot AGP, e 1 slot PCI Express Grafica su entrambe le schede madri 775Dual-880Pro. Slot PCI: Sono utilizzati per installare schede di espansione con Interfaccia PCI a 32-bit. Slot AGP: Lo slot AGP serve all’installazione di schede grafiche. Lo slot AGP ASRock usa uno speciale gancio che permette di fissare in sede in modo sicuro la scheda grafica.
  • Page 94 Nota: Per selezionare +5VSB, si richiedono almeno 2 Ampere e il consumo di corrente in standby sarà maggiore. (vedi p.2 Nr. 24) (vedi p.2 Nr. 24) Nota: Se i jumper JL1 e JR1 sono chiusi, funzionano sia i connettori audio frontali che posteriori. Resettare la CMOS (CLRCMOS1, jumper a 2 pin) jumper a 2 pin (vedi p.2 Nr.
  • Page 95 Floppy disk (33-pin FLOPPY1) Lato del Pin1 con la striscia rossa (vedi p.2 Nr. 21) Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) Connettore IDE secondario (nero) (39-pin IDE1, vedi p.2 Nr.
  • Page 96 Collettore USB 2.0 Il dispositivo ASRock 8CH I/O mette a vostra disposizione 4 (9-pin USB67) porte USB 2.0 di default sul (vedi p.2 No. 20) pannello posteriore. Se le porte USB posteriori non sono sufficienti, è disponibile questo collettore USB 2.0 (USB67) che può...
  • Page 97 Connettori audio interni Permettono di ricevere input stereo audio da fonti di suono (4-pin CD1) come CD-ROM, DVD-ROM,TV (CD1: vedi p.2 Nr. 25) tuner, o schede MPEG. Connettore audio sul pannello È un’interfaccia per il cavo del frontale pannello audio. Che consente...
  • Page 98 (vedi p.2 Nr. 29) Connettore ATX 12V È necessario collegare una alimentazione con spinotto da (4-pin ATX12V1) 12V ATX a questo connettore (vedi p.2 Nr. 2) in modo che possa fornire energia sufficiente. In caso contrario l’unità non si avvia.
  • Page 99 Questa sezione illustra come installare hard disk SATA. 1° PASSO: Installare gli Hard Disk SATA negli spazi per le unità disco del telaio. 2° PASSO: Collegare il cavo d’alimentazione SATA al disco rigido SATA.
  • Page 100 Iniziare a formattare e copiare i file [Y/N]?) Inserire un dischetto floppy nel floppy drive e premere <Y>. E. Il sistema inizierà a formattare il floppy-disk e a copiare i driver SATA su questo. Passo 2: Usare “SATA RAID BIOS” per impostare la configurazione RAID.
  • Page 101 SATA e alla configurazione RAID” contenuto nella cartella con percorso: .. \ SATA RAID BIOS e al documento del medesimo CD denominato “Guide to VIA RAID Tool - Guida al VIA RAID Tool ” contenuto nella cartella con percorso: .. \ VIA RAID Tool 1.
  • Page 102 RAID Se si desidera installare Windows 98 / ME / 2000 / XP / XP 64-bit sulle unità disco rigido SATA senza funzioni RAID o installare Windows 98 / ME / 2000 / XP / XP 64- bit sulle unità...
  • Page 103 Windows : 98 SE / ME / 2000 / XP. Il CD di supporto a corredo della scheda madre contiene i driver e utilità necessari a potenziare le caratteristiche della scheda. Inserire il CD di supporto nel lettore CD-ROM. Se la funzione “AUTORUN” è attivata nel computer, apparirà...
  • Page 104: Contenido De La Caja

    ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 105 1 slot PCI Express Gráfica, compatible con tarjeta gráfica PCI Express x 16 (vea ATENCIÓN 6) USB 2.0: 8 puertos USB 2.0: incluyen 6 puertos USB 2.0 listos para su uso en el panel 1 0 5 1 0 5 1 0 5...
  • Page 106 PC. NO utilice una tarjeta AGP de 3,3V AGP en la ranura AGP de esta placa base. Podría causar daños permanentes. Para obtener información sobre las tarjetas VGA AGP compatibles, consulte la “Lista de tarjetas VGA AGP admitidas para la ranura AGP”...
  • Page 107: Instalación

    4. Ponga cualquier componente deslocalizado sobre la bolsa anti- estástica que viene con la placa madre. 5. Al colocar los tornillos en sus agujeros para fijar la placa madre en el chasis, no los apriete demasiado. Eso podría dañar la placa madre.
  • Page 108 Antes de insertar la CPU de 775 agujas en el socket, compruebe que la superficie de la CPU se encuentra limpia y no hay ninguna aguja torcida en el socket. No introduzca la CPU en el socket por la fuerza si se produce la situación anterior. Si lo hace, puede producir daños graves en la CPU.
  • Page 109 Para una correcta instalación, consulte los manuales de instrucciones del ventilador y el disipador de la CPU. A continuación se ofrece un ejemplo para ilustrar la instalación del disipador para la CPU de 775 agujas. (Aplique el material termal de interfaz) Paso 1.
  • Page 110 Repita el proceso con los cierres restantes. Si presiona los cierres sin girarlos en el sentido de las agujas del reloj, el disipador no se podrá fijar a la placa madre. Paso 5. Conecte el cabezal del ventilador con el conector del ventilador de la CPU en la placa madre.
  • Page 111: Instalación De Memoria

    (DDRII1 y DDRII2; ranuras amarillas; consulte la pág.2 Nº 6) o un par DIMM DDR idéntico en el canal dual B (DDR1 y DDR2; ranuras de color azul; consulte la pág. 2 Nº 7) para activar la tecnología de memoria de canal dual. Puede consultar la tabla de configuración de memoria de canal dual que figura a continuación.
  • Page 112 Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema. Paso 1. Empuje los clips blancos de retención por el extremo de cada lado de la ranura de memoria. Paso 2. Encaje la muesca del DIMM hacia la cumbrera de la ranura.
  • Page 113 Paso 2. Quite la tapa que corresponde a la slot que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la slot. Empuje firmemente la tarjeta en la slot. Paso 4. Asegure la tarjeta con tornillos.
  • Page 114 (ver p.2, N. 24) (ver p.2, N. 24) Atención: Si los puentes JL1 y JR1 son cortos, tanto el conector de audio del panel frontal como del panel posterior pueden funcionar. Limpiar CMOS (CLRCMOS1, jumper de 2 pins) jumper de 2 pins (ver p.2, N.
  • Page 115 (ver p.2 N. 21) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) IDE conector secundario (negra) (39-pin IDE1, ver p.2 N.
  • Page 116 (vea p.2, N. 28) wireless opcional. Conector de audio interno Permite recepción de input audio de fuente sónica como CD- (4-pin CD1) ROM, DVD-ROM, TV tuner, o (CD1: vea p. 2, N. 25) tarjeta MPEG. 1 1 6...
  • Page 117 (ver p.2, N. 15) Conector del ventilador Conecte el cable del ventilador de la CPU de la CPU a este conector y haga coincidir el cable negro (4-pin CPU_FAN1) con el conector de tierra. (ver p.2, N. 5) Conexión de juegos...
  • Page 118 Conector de ATX 12V power Tenga en cuenta que es necesario conectar este (4-pin ATX12V1) conector a una toma de corriente (ver p.2, N. 2) con el enchufe ATX 12V, de modo que proporcione suficiente electricidad. De lo contrario no se podrá...
  • Page 119 PASO 2: Conecte el cable de alimentación SATA al disco duro SATA. PASO 3: Conecte un extremo del cable de datos SATA al conector SATA de la placa base. PASO 4: Conecte el otro extremo del cable de datos SATA al disco duro SATA.
  • Page 120 SATA con funciones RAID, siga los pasos siguientes. PASO 1: Haga un disquete del controlador SATA. Inserte el CD de soporte de ASRock en la unidad óptica de la unidad para iniciar el sistema. (NO inserte ningún disquete en la unidad de disco en este momento) B.
  • Page 121 “Guía para la instalación de discos duro SATA y Configuración RAID” que está situado en la carpeta indicada en la siguiente ruta de acceso: .. \ SATA RAID BIOS y el documento contenido en el CD de soporte, “Guía de VIA RAID Tool”, situado en la carpeta que indica la ruta de acceso siguiente: ..
  • Page 122 RAID Si desea instalar Windows 98 / ME / 2000 / XP / XP 64 bits en sus discos duros SATA sin funciones RAID o si desea instalar Windows 98 / ME / 2000 / XP / XP 64 bits en sus discos duros IDE, consulte los métodos siguientes para una instalación...
  • Page 123 CPU LGA 775”. Le recomendamos que ejecute este programa de demostración antes de iniciar la instalación de la CPU LGA 775, para así reducir los riesgos de daño a la CPU por un uso inadecuado. Para ver esta demo, puede utilizar Microsoft Media Player para reproducir el archivo.

Table of Contents