Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Prestel EHD3-4K100LU
Summary of Contents for Prestel EHD3-4K100LU
- Page 1 Prestel EHD3-4K100LU HDBaseT 3.0 Extender with eARC/ ARC (100m) USER MANUAL...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction This HDBaseT 3.0 Extender can extend uncompressed HD/UHD video and audio signals, eARC/ARC, RS-232, bi-directional IR, 1GbE Ethernet and USB2.0 signals up to 100m/328ft via a single CAT6A/7 cable. The Transmitter supports audio embedding or de-embedding. The Receiver supports audio de-embedding. -
Page 4: Specifications
4. Specifications Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2 Video Bandwidth 18Gbps Video Resolution Up to 4K@60Hz 4:4:4 HDBaseT 16Gbps on main and 2Gbps on return link Bandwidth HDR, HDR10, HDR10+, Dolby Vision, HLG Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0 Color Depth 8/10/12-bit LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,... - Page 5 Input: 1 x HDBT IN [RJ45, 8-pin female] 1 x SPDIF IN [S/PDIF] Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x L/R OUT [3.5mm Stereo Mini-jack] Control: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] Receiver 1 x RS-232 [3pin-3.81mm Phoenix jack] 1 x SERVICE [Mini-USB, Update port]...
-
Page 6: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Transmitter Panel LOOPOUT / HOST / IN/OUT AUDIO ONLY DEVICE SERVICE POWER LINK VIDEO ARC SPDIF SELECT HDMI OUT USB DEVICES USB HOST SPDIF OUT HDMI IN HDMI OUT IR IN IR OUT DC 24V HDBT OUT (eARC/ARC) RS-232... - Page 7 HOST/ Switch to left (HOST), the USB HOST mode is enabled; DEVICE USB Switch to right (DEVICE), the USB DEVICE mode is enabled. switch Two USB device ports, connected to U disk, mouse or keyboard. DEVICES USB HOST USB extension host port, connected to PC. Firmware update port.
-
Page 8: Receiver Panel
5.2 Receiver Panel DEVICE / HOST SERVICE POWER LINK VIDEO ARC SPDIF SELECT USB DEVICES USB HOST SPDIF IN HDMI OUT IR IN IR OUT DC 24V HDBT IN (eARC/ARC) RS-232 Name Function Description Power LED Red LED indicates that the Receiver is powered on. ▪... -
Page 9: Input & Output Switching
1G Network port. When it switches to Gigabit Ethernet, the green indicator lights on; When it switches to 100M Ethernet, the yellow indicator lights on. 10G Network port, connected to the HDBT OUT port of Transmitter HDBT IN with a CAT 6A/7 cable. It is used for various signals pass-through. ▪... - Page 10 Scene 2: Set the Extender to SPDIF Mode. Then switch the LOOP OUT/ AUDIO ONLY switch to left, the HDMI OUT port of the transmitter is set to LOOP OUT. HDMI OUT HDMI IN UTP Cable LOOP OUT SPDIF IN SPDIF OUT Audio Amplifier Scene 3: Set the Extender to ARC Mode.
-
Page 11: Audio Embedding And De-Embedding
Scene 5: Set the Extender to eARC Mode. Then switch the LOOP OUT/ AUDIO ONLY switch to right, the HDMI OUT port of the transmitter is set to AUDIO ONLY. Soundbar with eARC HDMI IN eARC HDMI OUT UTP Cable AUDIO ONLY eARC Audio Amplifier... -
Page 12: Usb Mode Applications
▪ TX Audio Embedding When the L/R IN/OUT switch is switched to left, the audio from external audio device will be embedded to the L/R IN/OUT port. HDMI IN HDMI OUT UTP Cable L/R IN MP3 Player ▪ TX Audio De-embedding When the L/R IN/OUT switch is switched to right, The L/R IN/OUT port will output the audio de-embedded from the HDMI IN port. -
Page 13: Ir Pin Definition
Mode 2: USB reverse from RX to TX Switch the HOST/DEVICE USB switch to right, then power off and reboot the transmitter to set to USB Device mode. Meanwhile, switch the DEVICE/HOST USB switch to right, then power off and reboot the receiver to set to USB Host mode. -
Page 14: Application Example
6. Application Example LOOPOUT / HOST / IN/OUT AUDIO ONLY DEVICE SERVICE POWER LINK VIDEO ARC SPDIF SELECT HDMI OUT USB DEVICES USB HOST Transmitter SPDIF OUT HDMI IN HDMI OUT IR IN IR OUT DC 24V HDBT OUT (eARC/ARC) RS-232 Power Supply IR Blaster...
Need help?
Do you have a question about the EHD3-4K100LU and is the answer not in the manual?
Questions and answers