Hardware Health Event Monitoring Screen - ASROCK 4COREDUAL-SATA2 - V1.1 User Manual

3.4

3.4 Hardware Health Event Monitoring Screen

3.4 Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen
3.4 3.4 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU fan
speed, chassis fan speed, and the critical voltage.
Main Advanced
Hardware Health Event Monitoring
CPU Temperature
M / B Temperature
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
CPU Quiet Fan
Target CPU Temperature ( C)
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU Quiet Fan
This item allows you to identify the temperature of CPU fan. If you set this
option as [Disabled], the CPU fan will operate in full speed. If you set this
option as [Enabled], you will find the item "Target CPU Temperature
( C)" appear to allow you adjusting it. The default value is [Disabled]. You
are allowed to enable this function only when you install 4-pin CPU fan.
Target CPU Temperature ( C)
The target temperature will be between 45 C and 65 C. The default
value is [50].
BIOS SETUP UTILITY
Boot Security
H/W Monitor
Target Fan Speed
Fast
: 37 C / 98 F Middle
Slow
: 31 C / 87 F
: 3400 RPM
: N / A
: 1.629V
: 3.306V
: 5.067V
Select Screen
: 11.890V
Select Item
F1 General Help
[Enabled]
F9 Load Defaults
[50]
F10 Save and Exit
ESC Exit
4 7 4 7
4 7 4 7 4 7
Exit