Advanced Screen; Cpu Configuration - ASROCK 4COREDUAL-SATA2 - V1.1 User Manual

3.3 Advanced Screen

3.3 3.3 Advanced Screen Advanced Screen Advanced Screen
3.3 3.3 Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP
Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.
Main Advanced
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.

CPU Configuration

Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
3.3.1 CPU Configuration 3.3.1 3.3.1 CPU Configuration CPU Configuration CPU Configuration
3.3.1 3.3.1 CPU Configuration
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Spread Spectrum
Boot Failure Guard
Ratio Status
Ratio Actual Value
Max CPUID Value Limit
Intel (R) Virtualization tech.
No-Excute Memory Protection
Hyper Threading Technology
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Overclock Mode
When [Auto] is selected, BIOS auto detects the present CPU host frequency
of this motherboard. The actual CPU host frequency and PCIE frequency will
show in the following items. When [CPU, PCIE, Sync.] is selected, you can
set the CPU Frequency (MHz) and PCI Frequency item. When [CPU, PCIE,
Async.] is selected, you can set the CPU Frequency (MHz), PCIE Frequency
(MHz) and PCI Frequency item.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Configure CPU
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Select how to set the
CPU host frequency.
[Auto]
[200]
[100]
[Auto]
[Enabled]
: Locked
: 18
Select Screen Select Screen
[Disabled]
Select Item Select Item
[Enabled]
+- +- Change Option Change Option
[Disabled]
F1 F1 General Help General Help
[Enabled]
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
3 6 3 6
3 6 3 6 3 6
Exit