Boot Settings Configuration; Security Screen - ASROCK 4CORE1600P35-WIFI - V1.0 User Manual

3 . 5 . 1 3 . 5 . 1

3 . 5 . 1 Boot Settings Configuration

Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration
3 . 5 . 1 3 . 5 . 1 Boot Settings Configuration
Boot Settings Configuration
Full Screen Logo
AddOn ROM Display
Boot From Onboard LAN
Bootup Num-Lock
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Full Screen Logo
Use this item to enable or disable OEM Logo. The default value is [Enabled].
AddOn ROM Display
Use this option to adjust AddOn ROM Display. If you enable the option
"Full Screen Logo" but you want to see the AddOn ROM information when the
system boots, please select [Enabled]. Configuration options: [Enabled] and
[Disabled]. The default value is [Enabled].
Boot From Onboard LAN
Use this item to enable or disable the Boot From Onboard LAN feature.
Boot Up Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.

3 . 6 Security Screen

3 . 6 3 . 6 3 . 6 3 . 6 Security Screen Security Screen Security Screen Security Screen
In this section, you may set or change the supervisor/user password for the system.
For the user password, you may also clear it.
Main Advanced
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Disabled: Displays
normal POST messages.
[Enabled]
Enabled: Displays OEM
[Enabled] Logo instead of POST
[Disabled] messages.
[On]
Select Screen
Select Item
+ - Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
H/W Monitor Boot Security
Install or Change the
password.
Select Screen
Select Item
Enter Change
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
7 0 7 0 7 0
7 0 7 0
Exit