Table of Contents
Advertisement
2.
Press <Esc> again to exit the Utility.
3.
Press <Y> to restart your computer.
You have successfully created a new RAID logical drive. Please install the operating system to your computer by
following the detailed instruction of the "User Manual" in our support CD or "Quick Installation Guide".
Two Logical Drives
After selecting the logical drive in Disk Assignments as the above-mentioned procedures, press <Ctrl-Y> to allocate a
portion of the disk drives to the first logical drive. Then please follow the steps below.
1.
Enter the desired capacity (MB) for the first logical drive and press <Enter>. The Define LD Menu displays again.
6
Advertisement
Table of Contents
