Advertisement

Operating Manual
ASSEMBLY
1. Fix dust container into place and push until
it clicks into place
2. Slide handle into the top of the vacuum
and push until it clicks into place
3. Insert flexible hose into the opening at the
back of the unit and turn clockwise to lock
into place
4. Loop hose over the hook illustrated
5. Push loose end of hose securely into the
hose inlet
6. Place cord hooks into the rear of the unit
as illustrated. Make sure your top hook
rotates freely and bottom hook points
downwards
7. Store your accessories on the unit as
illustrated
8. Store your turbo pet tool on the front of
the unit by clicking into place
RHUV7001
RHUV7001
POWERING ON
SUITABLE FOR USE
Carpet
WASH FILTERS
Wash the filters with cold
water at least once a month
REGISTER YOUR
FREE 1 YEAR
GUARANTEE
TODAY
Hard Floors
1
MONTH
Revision 1.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the hypermax RHUV7001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Russell Hobbs hypermax RHUV7001

  • Page 1 Operating Manual RHUV7001 POWERING ON ASSEMBLY 1. Fix dust container into place and push until it clicks into place 2. Slide handle into the top of the vacuum and push until it clicks into place 3. Insert flexible hose into the opening at the back of the unit and turn clockwise to lock into place SUITABLE FOR USE...
  • Page 2: Register Online

    GUARANTEE At Russell Hobbs, we take all our customer feedback seriously. 0345 209 7461 Feel free to contact our Product Care Team, on who will be more than happy to assist you. This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase.
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS • Do not use appliance if it has been dropped, damaged, left outdoors or dropped into water. Do not operate this appliance for anything other than its intended use. Keep the appliance and adapter away from water; do not allow it to get wet.
  • Page 5 NOTES RHUV7001 Revision 1.2...
  • Page 6: Operation

    OPERATION • Turn the dial to adjust the floor head height as appropriate • To use accessories, ensure the pile is set to “high” • Remove hose from inlet • Push into wand handle • Attach desired accessory onto the wand TOOL ATTACHMENTS *Do not use on animals RHUV7001...
  • Page 7: Emptying The Bin

    EMPTYING THE BIN REPLACING THE BELT Use cross-head screwdriver on screws. Grasp old belt and remove from motor shaft. Loop new belt over motor shaft, stretch other side over floor brush in space between bristles. Turn the brush several times to align. Replace the brush cover. LOOKING FOR BLOCKAGES RHUV7001 Revision 1.2...
  • Page 8: Carrying The Appliance

    IMPORTANT! WASH THE FILTERS CARRYING THE APPLIANCE REGISTER YOUR FREE 1 YEAR GUARANTEE CAUTION Take care using TODAY as a carry handle WASH FILTERS Wash the filters with cold MONTH water at least once a month RHUV7001 Revision 1.2...
  • Page 9: Problem Solving

    PROBLEM SOLVING The vacuum cleaner • Check the vacuum is plugged in doesn’t switch on • Check the socket is switched on • Check another appliance in the socket • Check for any obvious signs of damage to cord or plug •...
  • Page 10 IMPORTANT! WASH FILTERS Wash the filters with cold water at least once a month The filters may require more frequent washing if vacuuming fine dust MONTH This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase.
  • Page 11 Made by Product Care Trading Limited under license from Spectrum Brands (UK) Limited. Product Care Trading Limited, Wigan, WN2 4AY/ PCT (NI) Ltd, Belfast, BT5 5AD. Russell Hobbs is the registered trademark of Spectrum Brands (UK) Ltd. Russell Hobbs Support: call 0345 209 7461 or visit mda.russellhobbs.com...

Table of Contents

Save PDF