Download Print this page
Home Accents Holiday Cauldron Witch Duo Easy Assembly And Operation Instructions

Home Accents Holiday Cauldron Witch Duo Easy Assembly And Operation Instructions

Advertisement

Quick Links

22SV23279 Cauldron Witch Duo
• Ensure that the item's adapter is plugged in at the Function Control Box and in
the wall.
• Ensure that the switch on the function control box is on the desired setting.
• If not functioning properly (ex: Mouth doesn't move, eyes don't light up, body
• Ensure that the item's adapter is plugged in at the Function Control Box and in the wall.
• Ensure that the switch on the function control box is on the desired setting.
doesn't move), ensure that cables are connected to their corresponding cable as
• If not functioning properly (ex: Mouth doesn't move, eyes don't light up, body doesn't move), ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
shown in the instruction sheet.
• Be sure nothing is blocking movement or caught in moving parts.
• Ensure that the floor or surface that the item sits on is flat and level.
• Be sure nothing is blocking movement or caught in moving parts.
• Be sure nothing is blocking the sensor.
• Ensure that the volume is not all the way down.
• Ensure that the floor or surface that the item sits on is flat and level.
• If the item still does not work, contact SVI customer service from 8:30am to 5:30pm pst at 1-855-428-3921, email customerservice@svius.com, or call HOME DEPOT customer service at 1-877-527-0313.
A. Base x 1
B. Left Support Pole x 1
C. Right Support Pole x 1
D. Left Costume x 1
E. Left Torso Frame x 1
F. Left Hip Hoop x 1
G. Shoulder Frames x 2
H. Left Head x 1
I. Left Witch Left Arm x 1
J. Left Witch Right Arm x 1
K. Right Hip Hoop x 1
L. Right Witch Skirt x 1
M. Right Torso Frame x 1
N. Right Shirt x 1
O. Right Head x 1
P. Right Witch Left Hand x 1
Q. Right Witch Right Hand x 1
R. Embers x 1
S. Cauldron Front x 1
T. Cauldron Rear x 1
U. Stirring Motor x 1
V. Cauldron Lights x 1
W. Bone Stirrer x 1
X. Stirrer Support x 1
Y. Bone Belt x 1
Z. Apron x 1
Z1. Left Cape x 1
Z2. Rt. Shawl x 1
Z3. Left Hat x 1
Z4. Right Hat x 1
Z5. Adapter * x 1
* Power Adapter Spec
Input: 100 - 240VAC 50/60Hz
Output: 5.9V 3A
NOTE: Throughout the instructions, Right and
Left are from the character's point of view.
C
BACK
A
RIGHT
A
J
K
R
Z
2
NOTE: The (D) Left Costume's opening
should be facing the back.
D
B
LEFT
FRONT
1.1
• Ensure that the volume is not all the way down.
• Be sure nothing is blocking the sensor.
• If the item still does not work, contact SVI Customer Service from 8:30am to
5:30pm PST at 1-855-428-3921, email customerservice@svius.com, or call
Home Accents Holiday Customer Service from Mon-Fri 8:00am to 7:00pm and
Sat 9:00 am To 6:00 pm EST at 1-855-HDHOLIDAY (1-855-434-6543).
B
C
D
L
M
S
T
U
Z
Z
3
4
NOTE: Thread the cables from the (E) Left
Torso Frame through the (D) Left Costume.
1.2
USA/ États-Unis 1007261586
E
F
G
N
O
W
X
Y
V
Z
5
E
B
D
2
.
1
TM
H
I
P
Q
Z
Z
1
F
E
F
E
2.2
1/4

Advertisement

loading
Need help?

Need help?

Do you have a question about the Cauldron Witch Duo and is the answer not in the manual?

Questions and answers

Summary of Contents for Home Accents Holiday Cauldron Witch Duo

  • Page 1 Home Accents Holiday Customer Service from Mon-Fri 8:00am to 7:00pm and • If not functioning properly (ex: Mouth doesn't move, eyes don't light up, body doesn't move), ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
  • Page 2 Cable pairs are color-coded to ensure proper color-matching connections. Plug the adapter into the Function Control Box. Cable pairs are color-coded to ensure proper color-matching connections.
  • Page 3 NOTE: The Sensor cable goes through the NOTE: Remove the rubber ring around the (W) NOTE: Slide the rubber ring under lower hand Bone Stirrer. of the (I) Left Witch Left Arm to keep in place. hole in the (T) Cauldron Rear. Make sure the (S) Cauldron Front faces forward.
  • Page 4 Be sure nothing is blocking the sensor. 1. Plug the power adapter into a standard power outlet and adjust the settings on the Function Control Box, located on the Right Torso Frame, as desired. Sensor / Détecteur 2. Settings: This switch mode will activate lights, sound, and animation when the Infra-red (IR) sensor is activated and will operate for 1 audio-cycle with each activation.

This manual is also suitable for:

22sv23279