NEFF D4962X0 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. NEFF Manuals
  4. Ventilation Hood
  5. D4962X0
  6. Operating and installation instructions
NEFF D4962X0 Operating And Installation Instructions

NEFF D4962X0 Operating And Installation Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
de
Gebrauchs- und
Montageanweisung
en
Operating and
installation instructions
fr
Notice de montage
et d'utilisation
nl
Gebruiks- en
montageaanwijzing
it
Istruzioni per l'uso
e l'installatore
es
Instrucciones de uso
y montaje
el
de
en
fr
nl
it
es
el

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D4962X0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NEFF D4962X0

Summary of Contents for NEFF D4962X0

  • Page 1 Gebrauchs- und Montageanweisung Operating and installation instructions Notice de montage et d’utilisation Gebruiks- en montageaanwijzing Istruzioni per l’uso e l’installatore Instrucciones de uso y montaje...
  • Page 2 Seite 03 – 15 pagina 55 – 67 page 16 – 28 página 68 – 80 page 29 – 41 81 – 93 pagina 42 – 54 Abb. 1 ELEKTRO ELECTR. KAASU ELETT. GASS...

  • Page 3: Description Of Appliance

    If the air intake is inadequate, there is a risk of poisoning from combustion gases which are drawn back into the room. An air-intake/exhaust-air wall box by itself is no guarantee that the limiting value will not be exceeded.

  • Page 4: Before Using For The First Time

    Use carefully. They contain important you may find descriptions of individual information concerning your personal features that do not apply to your safety as well as on use and care of the specific appliance. appliance. This extractor hood complies with all Please retain the operating and relevant safety regulations.
  • Page 5 filter unit. The extractor hood will start at the most recent fan setting. Light: The light can be switched on at any time Fan settings even when the appliance is off or the filter Intensive setting drawer is inserted.

  • Page 6: Filters And Maintenance

    Warning: The halogen bulbs must be grease particles in the cooking vapours. switched off and cool. The filter mats are made from non- 1. Pull the filter drawer all the way out. combustible metal. 2. Depress the catches at the rear of the Caution: grease filter and remove the grease filter.
  • Page 7 As the filter becomes more and more Removing the filter: saturated with grease, there is an increased risk of fire and the function of the extractor Warning: The halogen bulbs must be hood may be impaired. switched off and cool.

  • Page 8: Cleaning And Care

    20 Watt, G4 bulbholder). soapy solution and a soft, damp cloth only. Caution: Plug-in bulbholder. Do not use stainless-steel cleaner to clean Take hold of the bulb with a clean cloth. the operating buttons. Stainless steel surfaces: Use a mild non-abrasive stainless steel cleaner.

  • Page 9: Installation Instructions

    Old appliances are not worthless above gas cooking devices, at a rubbish. Valuable raw materials can be minimum height of 650 mm – Fig. 1 – is reclaimed by recycling old appliances. permitted provided that the following Before disposing of your old appliance, nominal heat loads (Hs) are not exceeded: render it unusable.

  • Page 10: Prior To Installation

    flue which is as reciprocal interlocking. already in use or via a shaft which is used for ventilating rooms in which fireplaces are If the air intake is inadequate, there is a located.

  • Page 11: Before Installation

    Round pipes Short exhaust air pipe: inside diameter min. 120 mm, 1. Make a hole in the top of the wall cupbo- Longer exhaust air pipe: ard, cutting out a notch for the power inside diameter min. 150 mm.
  • Page 12 293 to 350 mm height: min. 435 mm. If the cupboard is deeper than 293 mm, the extractor hood can be moved back, e.g. to put a spice rack in front of the extractor hood. To do this, place the template further back.
  • Page 13 Fitting into wall cupboard 4. Also attach the extractor hood to the left Check door alignment and readjust if and right wall cupboards with 2 screws necessary. each side. First make pilot holes with a 1. Remove grease filter bradawl.
  • Page 14 filter drawer can be moved When you drill: forwards. 2 mm dia – max. 10 mm in depth. To do this, undo the screws, move the stops and retighten the screws. 2. Align handle...

  • Page 15: Electrical Connection

    Brown – Live disconnecting devices. These include LS If you fit your own plug, the colours of switches and contactors. these wires may not correspond with the This extractor hood complies with EU identifying marks on the plug terminals.
  • Page 16 Notizen...
  • Page 17 Z5144X5 5 3x 434229 Aluminium: Z5779A0 Metall: Z5779N0...
  • Page 18 Postfach 10 02 50 D-80076 München Fax: 0 89 / 45 90-30 99 Internet: http.//www.neff.de 1 0,12/min. DTAG D4962X0 5750 204 891 D4972X0 Printed in Germany 0803 Es.

This manual is also suitable for:

D4972x0

Table of Contents