Various System Settings; Setting The Key Press Sound - Omron NT20 User Manual

Various System Settings

3-8

Various System Settings

3-8-1

Setting the Key Press Sound

106
The NT20 can set a variety of functions to the memory switches which are
convenient during the operation. This section describes the memory switch
settings related to the operation environment.
Whether or not the key press sound is given when the NT20 touch switch is
pressed can be set with the memory switch.
The factory setting has been set to give the key press sound when the touch
key is pressed.
Set the key press sound by the menu operation from the System Menu as
described below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
Init. Memory
Memory Switch
[ MEMORY SW MENU ]
Comm. Type
Key Sound
Buzzer Sound
Bk light Off
Tool Mode
Select "Maintenance Mode".
Select "Memory Switch".
DIP-SW Status
Each time the "Key Sound"
(1/2)
touch switch is pressed, the
Quit
setting option "ON" alter-
Host Link
nates with "OFF".
Page
OFF
OFF
WRT
None
&
NT20S
EXIT
Section 3-8