Omron NS Reference Manual page 5

Section 1 Outline of Macro Function
NS series Macro Reference
1-2 Macro Execution Condition
Macros can be created for each project, screen, and functional objects. Also they can be
created for the following execution conditions.
Executing conditions for the project
Macro execution conditions that can be made for the project are indicated below.
Select [PT]-[Project Properties]-[Macro] tab in CX-Designer, then set execution condition and
record macro.
For details on registering macros, refer to the online CX-Designer Help 'System Settings and
Project Properties'.
Execution condition
When Loading a Project
ON timing Alarm/Event
occurred
ON timing Alarm/Event is
canceled
When a bit changed
When a value changed
Execution conditions for the screen
Macro execution conditions that can be made for each screen are indicated below.
Select [PT]-[Screen/Sheet Properties]-[Macro] tab screen in CX-Designer, then set execution
condition and record macro.
For details on registering macros, refer to the online CX-Designer Help 'Creating Screens'
Execution condition
When Loading a Screen
When Unloading a Screen
Explanation
Execute just before loading the first screen after
starting up NS-Hardware
Execute when alarm is occurred
Execute when alarm is cancelled
Set macro to execute when the address of specified
bit type is changed. Up to 10 macros can be set.
Set macro to execute when the address of specified
word type is changed. Up to 10 macros can be set.
Explanation
Execute immediately after reading screen data to
display the next
Execute immediately after closing the current screen
1-3