Omron NS Reference Manual page 40

Hide thumbs Also See for NS:

Section2 Functions

NS series Macro Reference

MOVEPOPWUP

Applicable versions

Format

Function

Return Value

Example

Reference

When setting macro "MOVEPOPWUP" for ON/OFF button, Word button, Command button and

Multifunction Object on a pop-up screen and moving the pop-up screen, select "Touch Off Timing". If

"Touch On Timing" is selected, the status of the object will be pressed.

Moves pop-up window up

System version 2 or higher

MOVEPOPWUP (n, y)

Move the pop-up screen page "n" to y dot up.

Setting range for "n" is 0 to 3999. If the value outside of the range or page number

that does not exist is specified, return value "-1" is returned. There is no restriction

on setting the value for "y". However, set the value in order to be displayed inside

of the screen. Part of the screen or whole screen may be deleted depending on

the set value.

0: Completed normally

-1: Specified no page

$W0=MOVEPOPWUP (10,32);

'Move pop-up screen page 10 to 32 dot up, then return "0" to $W0. If pop-up

screen is not displayed, return "-1" to $W0.

Ns-series