Omron NS Datasheet page 11

2
Controller Link Connection
The HMI can be connected to an OMRON Controller Link network by mounting a Controller Link Interface Unit.
NS-CLK21
NS Series
If a Controller Link connection is
used, data links can be configured
between PLCs and multiple
PLCs can be monitored from the
NS-series HMI screen.
3
Ethernet Connection
When using the NS-series HMI with Ethernet you can connect to any Omron controller with an Ethernet port. Beside this you can also use a FTP
client to gather data from the NS and even transfer project data to different NS HMI terminals.
NS Series
4
Connections across Different Network Levels
The NS-series HMI can connect to a variety of devices in the network, through as many as 3 network levels. For example, if SAP (Smart Active
Parts) are being used, an NS-series HMI connected by Ethernet can be used to monitor the information in a PLC connected through Controller
Link as well as the information in the DeviceNet Slaves connected to that PLC.
NS Series
Seamless and
Program-less
Advanced Industrial Automation
NS SERIES
PLC
· Baud rate
2 Mbps (500 m max.)
1 Mbps (800 m max.)
500 kbps (1 km max.)
· Max. number of nodes: 32 nodes
PLC
NS Series
PLC
PLC
Personal computer
PLC
Seamless and
Program-less
PLC
PLC
NS Series
Trajexia motion controller
Ethernet
Controller Link
PLC
DeviceNet
11
11