Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FONESTAR PR-5200
Summary of Contents for FONESTAR PR-5200
- Page 1 R-5200 LCD PROJECTOR INSTRUCTION MANUAL...
- Page 2 We take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
-
Page 3: Exemption Of Liability
The characteristics of the equipment and the content of the manual can change without forewarning. FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the information supplied in this instruction manual, and specifically disclaims any implied liability for marketability or fitness for any other use. - Page 4 DESCRIPTION LCD projector 5,200 lumens maximum, 2,600 lumens ANSI with long-lasting halogen lamp. For screens from 30” to 300”. XGA resolution (1024 x 768). Compatible with 480p, 576i, 480i, 720p, 1080i y 1080p. It is equipped with trapezoidal correction which allows the positioning of the image to be adjusted. It has a compact and lightweight design.
-
Page 5: Rear Panel
REAR PANEL 1.- AUDIO OUT: audio stereo output, 3.5 mm jack. 2.- AUDIO IN: audio stereo input, 3.5 mm jack. Complementary audio input for VGA input. 3.- MONO L, R: audio mono input, 2 x RCA connectors. 4.- Video input through componenets Y, Pb, Pr, 3 x RCA connectors. 5.- VIDEO: composite video input, RCA connector. - Page 6 10.- Arrow buttons to move to the different menu options. 11.- OK: confirms the selected menu option. 12.- MENU: shows the main menu in the display. 13.- BACK: allows to return to the main menu. 14.- LAMP: allows selection of lamp mode. You can choose among auto luminosity, normal luminosity or echo luminosity, which reduces consumption by the lamp and increases its lifespan.
- Page 7 CONNECTION Before making any connections, switch off all the devices and disconnect them from the power supply. It is recommended that you read the whole manual before connecting the devices. The general connection procedure is the following: Firstly, connect the desired audio/video sources to the corresponding projector inputs. You can connect, for example, a computer with HDMI or VGA output, a DVD player with video output through components or a video player with composite video RCA output.
-
Page 8: Input Selection
INSTRUCTIONS FOR USE INPUT SELECTION Press the INPUT button on the remote control or on the projector to access the list of available inputs. Select the desired input with the up (w) and down (s) buttons on the remote controlor the projector and then press the confirmation button OK. -
Page 9: Configuration Menus
CONFIGURATION MENUS Press the MENU button on the remote control or the projector itself to access the 4 configuration menus on the projector. These 5 menus are: PC ADJUSTMENT, DISPLAY, COLOUR ADJUSTMENT, SETTING and EXPAND. You can browse through them using the up (w)and down (s) buttons on the remote control or the projector itself. -
Page 10: Display Menu
DISPLAY MENU Use the up (w) and down (s) buttons on the remote control or on the projector itself and move the cursor over the desired option in the DISPLAY menu. Then, press the OK button on the remote control or on the projector itself to access the corresponding submenu. -
Page 11: Menu Position
MENU POSITION Allows the menu to be situated on the screen in one of the following positions: - Top left - Top right - Center - Bottom left - Bottom right WALLPAPER Allows wallpaper colour selection when there is no input signal in the following ways: - Blue - Black SYSTEM... - Page 12 VIDEO THROUGH COMPONENTS Note: this SYSTEM submenu is not available if the input selected is HDMI. COLOUR ADJUSTMENT MENU Use the up (w) and down (s) buttons on the remote control or the projector itself and move the cursor over the desired option in this COLOUR ADJUSTMENT menu.
-
Page 13: Adjustment Menu
Allows colour temperature configuration among the following options: - Low - Medium - High RED, GREEN, BLUE Allows configuration of the tone level of the colours red, green and blue between the following values: - 0 ~ 63 CLARITY Allows clarity level configuration of projector images between the following values : - 0 ~ 15 ADJUSTMENT MENU Use the up (w) and down (s) buttons on the remote control or on the projector itself and move the cursor... -
Page 14: Expand Menu
VENTILATOR Allows configuration of the operating mode of the ventilators after switching off the projector among the following options: - Normal: normal operating speed. - 60 sec: faster than normal mode. - 0 sec: allows withdrawal of mains cable directly after switching off the projector, without the need to operate the ventilators. -
Page 15: Auto Start
AUTO START Allows the following actions to be undertaken: - Input search: makes an automatic search among the available inputs and stops when it finds one. This function can be enabled or disabled. - PC Auto Adjust: automatically adjusts some of the projector’s image parameters depending on the selected input. -
Page 16: Test Pattern
It allows a period of time to be set for the cleaning of the projector’s filter. When the projector reaches a specific period between filter cleanings, an icon appears in the display informing that it needs to be cleaned again. Reset the timer so that the icon in the display disappears. - Filter counter:indicates the projector usage time since the last filter cleaning. - Page 17 PROJECTOR’S REMOTE CONTROL It is possible to control the projector through the series port via the protocol RS-232 or via a local area network (LAN). COMMUNICATION PROTOCOL RS-232 To configurate the device through the RS-232 port it is recommended that the Windows Hyperterminal application or similar apllication is used and configurated in the following way: - Select the corresponding COM port, press Configurate and set the following values: - Bits per second: 19200...
- Page 18 COMMUNICATION PROTOCOL VIA LAN Connect the projector to a power supply using Cat5e/6 cable. To configurate the device through the LAN port, refer to the Expand menu > Network: Select the DHCP ON option to automatically obtain the network parameters: If the option DHCP OFF is selected, the network parameters must be inserted manually.
-
Page 19: Lamp Replacement
- Insert the replacement lamp and position the 3 screws carefully. Put the protective cover back in position and reconnect the projector to the power supply INSTALLATION It is possible to install the PR-5200 projecto in four different ways depending on the projection mode. The - 19 -... - Page 20 parameters to take into consideration when choosing the projection direction are the location of the projector, the screen and the size of the screen Once the type of installation to be made has been decided, select the required projection direction (front, front/ceiling, inverted (back) or inverted (back/ceiling) in the Image/Projection menu as in the following images: Adjust the distance between the projector and the screen according to the following tables.
-
Page 21: Technical Specifications
TECHNICAL SPECIFICATIONS PR-5200 CHARACTERISTICS LCD projector with halogen lamp. RESOLUTION XGA (1024 x 768) real Compatible with 480p, 576i, 480i, 720p,1080i and 1080p BRIGHTNESS 5200 lumens maximum, 2600 ANSI lumens CONTRAST 3.000:1 LAMP 215 W halogen, lasting 4000 hours in standard mode, 6000 hours... -
Page 22: Declaration Of Conformity
This product has been tested and has passed the corresponding quality control prior to being put on the market. FONESTAR guarantees the suitability of the product for its specified use during a period of 2 years from the delivery date and commits itself to repair or substitute the goods as expressed in the Spanish law ‘La Ley General para la Defensa de los...
Need help?
Do you have a question about the PR-5200 and is the answer not in the manual?
Questions and answers