Page 2
We take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
The characteristics of the equipment and the content of the manual can change without forewarning. FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the information supplied in this instruction manual, and specifically disclaims any implied liability for marketability or fitness for any other use.
DESCRIPTION - LED projector, 1,500 lumens maximum, 400 lumens ANSI, with long-lasting LED lamp (50,000 hours). For screens from 60" to 120". SVGA resolution (800 x 600) supports 1080p. - It has trapezoidal correction allowing manual adjustment of the image position. It allows you to select a projection type: desktop, ceiling, projection from the front or from the back.
REMOTE CONTROL POWER: button for selecting between standby mode or on. 0-9: number buttons. -/--: buttons to select entering 1 or 2 digits. VOL +/VOL -: internal loudspeaker volume adjustment. MENU: displays main menu. Navigation buttons for different menu options. 12: start and pause file playback.
Page 6
CONNECTION Before making any connection, switch off all the equipment and disconnect it from the mains. We recommend you read the whole manual before connecting the equipment. The general connection procedure is as follows: - Firstly, connect the required audio/video sources to the corresponding inputs on the projector. You can connect, for example, a computer with HDMI or VGA output, a DVD player with video output through components or a video player with composite video RCA output.
INSTRUCTIONS FOR USE INPUT SELECTION Press the SOURCE button on the remote control to access the list of inputs and select the input you would like to view. Select the required input using the navigation buttons up (w) and down (s) on the remote control and then press the OK confirmation button.
CONFIGURATION MENUS Press the MENU button on the remote control to access the 4 projector configuration menus. These 4 menus are: IMAGE, AUDIO, TIME and OPTIONS. You can browse through them using the navigation buttons left (a) and right (d) on the remote control. IMAGE MENU Use the up (w) and down (s) navigation buttons on the remote control to place the cursor on the required option in this IMAGE menu.
ASPECT RATIO Allows the projector’s aspect ratio to be configured in the following modes: - Full - Zoom 1 - Zoom 2 - 16:9 (x1) - 16:9 (x2) - 4:3 - Down 1-6 NOISE REDUCTION Allows the projector’s noise reduction to be configured in the following modes: - Off - Low - Medium...
AUDIO MENU Use the navigation buttons up (w) and down (s) on the remote control to place the cursor on the required option in this AUDIO menu. Then, press the OK button on the remote control to access the corresponding submenu.
Page 11
TIME MENU Use the navigation buttons up (w) and down (s) on the remote control and place the cursor on the required option in this TIME menu. Then, press the OK button on the remote control to access the corresponding submenu.
SLEEP TIMER Allows a countdown timer to be configured to automatically disconnect the projector. It has several options: - Off - 10 minutes - 20 minutes - 30 minutes - 60 minutes - 90 minutes - 120 minutes - 180 minutes - 240 minutes MENU OPTIONS Use the navigation buttons up (w) and down (s) on the remote control and place the cursor on the option...
USB MENU Press the SOURCE button on the remote control and select the device USB 1 or USB 2 as a signal input source. When the USB storage device has been connected, press the MENU button on the remote control to access the USB menu.
Page 14
Press the OK button again to access the files contained in the storage device to be able to view the images. If you wish to view the image on the full screen and view a presentation of the images contained in the USB storage device, press the play/pause button (12) on the remote control.
MUSIC MENU Press the OK button when the cursor is on the Music option to access the menu. Then, the option to access the connected USB storage device will appear. Press the OK button again to access the files contained in the storage device to be able to listen to the audio files.
Page 16
If you wish to access the different possibilities that the audio player offers, press the play/pause (12) button on the remote control. An image of a level indicator will appear on the screen, it is possible to select different options: - Pause: allows playback to be paused.
MOVIE MODE Press the OK button when the cursor is on the Movie option to access the menu. Then, the option to access the connected USB storage device will appear. Press the OK button again to access the files contained in the storage device to be able to view the video files.
Page 18
Select the video file you wish to view using the navigation buttons on the remote control. Press the play/pause (12) button on the remote control to begin playback. If you wish to access the different possibilities that the video player offers, press the OK button on the remote control: - Play/Pause: allows playback to be paused.
Page 19
TEXT MENU Press the OK button when the cursor is on the Text option to access the menu. Then, the option to access the connected USB storage device will appear. Press the OK button to access the files contained in the storage device to be able to view the text files in txt format.
Page 20
To return to the USB menu, place the cursor over the Return option and then press the OK button on the remote control. Select the Return option again and press OK. - 20 -...
INSTALLATION It is possible to install the PR-1501 projector in 4 different ways depending on the projection mode. The parameters to be taken into account when choosing the direction of projection are the location of the projector, the screen and the size of the screen.
2 months after being conscious of the problem. It is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it.