CyberData VoIP Multicast Gateway Specification Sheet

VoIP Multicast Gateway
The CyberData Multicast Gateway is
designed to bridge the gap between
Analog PBX systems and IP based
paging systems.
Through a web based interface, the user
can program different Multicast broadcast
addresses. As an analog phone endpoint,
the Multicast Gateway answers like a
regular phone. By entering a DTMF tone
from the users handset, different
Multicast address can be selected. Once
selected, the user can page to different
zones via a Multicast RTP stream.
In the "Audio-IN" mode, line level audio
input is converted into a multicast
broadcast that can be used for
background music or other audio
sources.
CyberData Corporation
VoIP Paging Gateway Specifications
Ethernet I/F
Power Input
Payload Types
Regulatory Compliance
Dimensions
Warranty
Part Number
Features
Dual speed 10/100 Mbps

Configurable DTMF tones to Zone

Controller
Web-based configuration

Web-based firmware upgradeable

Power-over-Ethernet (PoE 802.3af)

enabled
Small footprint

IGMP

Audio-in option for streaming audio

CyberData Corporation 2555 Garden Road

(831) 373-2601 (831) 373-4193 www.cyberdata.net
 
CyberData Corporation
10/100 Mbps
PoE 802.3af or 48VDC
G711 µ-Law, A-Law
FCC Class B, UL 60950, CE
6.11"L x 4.05"W x 1.15"H
2 years limited
010972
Monterey, California 93940

930191D/080821