Brunner HKD SK Instruction Manual

Hide thumbs Also See for HKD SK:

Advertisement

Quick Links

Instruction
manual
HKD SK
©2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HKD SK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Brunner HKD SK

  • Page 1 Instruction manual HKD SK ©2019...
  • Page 2: Table Of Contents

    Firewood and heating power........8 Basic rules for operation..........12 Designation of components........16 Adjusting of combustion air........18 Lighting fire in a cold fireplace........20 Stoking up in a warm fireplace........21 Cleaning................ 22 Note................23 Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 3 Subject to technical changes! Please keep the User Guide for future reference! Waste on fire = Toxins in your garden © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 4: Notes On Ceramic Glass

    NOTES ON CERAMIC GLASS BRUNNER uses only ceramic glass supplied by SCHOTT. SCHOTT is an international technology company with over 125 years of experience in the field of specialty glass, special materials and advanced technologies. With over 60 million of sold ROBAX® ceramic glass panes, SCHOTT is a leading manufac- turer of transparent heat resistant materials.
  • Page 5: Safety Precautions

    Under certain cir- cumstances this can lead to risk of flue gas poisoning. The fire- place door must stay closed even if the fire is not burning. © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 6 Risk of deflagration! Consult your stove fitter and follow the instructions in chapter "Manual adjusting of com- bustion air in the case of emergency" of the User Guide for the control system. Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 7: Initial Operation

    (194°F). Operating temperatures below 60°C (140°F) will cause fast soot build-up on the heat exchanger faces and significant loss of efficiency. Above 95°C (203°F) the thermal discharge safety device will respond, lead- ing the excessive heat safely away. © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 8: Firewood And Heating Power

    You can support our efforts to protect our environment by respecting the following recommendations for low-emission heating: Use only dry, natural wood with a residual humidity factor below 20%, or wood briquettes according to DIN EN 17225-3. Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 9 >8 cm (3.15 in) (right). What amount of heat will I get when buying wood per weight? 500 kg freshly cut wood Water content 50% 500 kg x 2.0 kWh/kg = 1000 kWh © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 10 Too much of firewood or inappropriate fuel types can cause overheating and damage. No kind of waste shall be burned in a fireplace! Waste on fire = Toxins in your garden! Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 11 This operation can be repeated after a heating pause of eight hours. If larger filling quantities are applied in a shorter time, an overload can oc- cur. © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 12: Basic Rules For Operation

    The fireplace door must always stay closed, even if the fire is not burning. Stoves and fireplaces from Ulrich Brunner GmbH are designed for period- ic burning. It means that always a minimal amount of firewood has to be loaded and the combustion air must be adjusted according to the following instructions.
  • Page 13 Please ask your stove setter for the allowed loads and heating in- tervals. Different heating intervals will apply, when the stove is op- erated for the first time! © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 14 Important note: Single cracks on fire-resistant combustion chamber linings are no reason for concern. The damper flap is installed in the flue pipe connecting piece between the heating insert and the chimney and regulates the chimney draft. Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 15 This is a normal, unavoidable process and does not constitute a reason for reclamation. Door sealing ropes BRUNNER is using only high-quality door sealing ropes, which are exactly adapted to the requirements of our heating devices. Yet the door sealings are wear parts, and therefore are not covered by our product warranty.
  • Page 16: Designation Of Components

    "Adjustment of Combustion air" for HKD 2.2 XL SK / HKD 2.2 The flue gas connection of the HKD 2.2 XL SK can be mounted on the side or on top. Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 17 The flue gas connection of the HKD 2.2 SK can be mounted on the side, on rear or top. © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 18: Adjusting Of Combustion Air

    Air control element in middle posi- tion. Air supply set to normal burning with rated power. Glow position: Air control element in right position. Air supply setting for keeping em- bers. All air supply openings are closed. Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 19 CAUTION: Risk of deflagration! The 'Glow' position cannot be chosen until flames are visible. Respect the ventilation requirements for simultaneous operation with other fireplaces. Pay particular attention to the requirements for operation togeth- er with ventilation systems. © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 20: Lighting Fire In A Cold Fireplace

    In case of rapid air streaming from the room (when fireplace door is opened) it is possible that the gases "trapped" inside the combustion chamber and downstream radiators/accumulators will suddenly react with oxygen and explode (deflagration). Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 21: Stoking Up In A Warm Fireplace

    That kind of fuel must be placed always close to the back wall of combustion chamber, to prevent contact with glass door. © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 22: Cleaning

    Lifetime of sealing ropes will be significantly shorter, if they are soaked by fluids or cleaning agents. Curing of the sealing rope can lead to glass breakage! Re- place it when necessary! Instruction manual (1.24) © 2019 Brunner GmbH...
  • Page 23: Note

    The warranty expires if the device has not been used as intended. Intended use includes reading and following the instructions of this User Guide. It is necessary to follow any other relevant instructions, like the "Operating instructions for tiled stove water boilers"! © 2019 Brunner GmbH Instruction manual (1.24)
  • Page 24 My stove fitting company: Ulrich Brunner GmbH Zellhuber Ring 17-18 D-84307 Eggenfelden Phone: +49 (0) 8721/771-0 E-mail: info@brunner.de Internet: www.brunner.de Art. No.: 19870 Instruction manual (1.24) © 2019 Brunner GmbH...

This manual is also suitable for:

19870

Table of Contents