Advertisement
Connect speaker wires
to the terminals on the
sound bar
1.
Strip
about
3/8
in (10 mm)
of
insulation from
each
speaker wire.
2.
Push down
on
the top
of
the terminal to
expose
the hole in the post.
3.
Insert the bare wire through the hole. Make
sure
the wire does not
touch any
other terminals.
4. Release the push terminal to
secure
the wire.
5. Repeat these
steps
for the
other
terminal.
Note:
The speaker
includes
three
channels and can either
use three
sets of
two
conductors or
a
six-conductor
cable.
4
Connect speaker wires
to the terminals on the
sound bar
1.
Strip
about
3/8
in (10 mm)
of
insulation from
each
speaker wire.
2.
Push down
on
the top
of
the terminal to
expose
the hole in the post.
3.
Insert the bare wire through the hole. Make
sure
the wire does not
touch any
other terminals.
4. Release the push terminal to
secure
the wire.
5. Repeat these
steps
for the
other
terminal.
Note:
The speaker
includes
three
channels and can either
use three
sets of
two
conductors or
a
six-conductor
cable.
4
Connect speaker wires
to the terminals on the
sound bar
1.
Strip
about
3/8
in (10 mm)
of
insulation from
each
speaker wire.
2.
Push down
on
the top
of
the terminal to
expose
the hole in the post.
3.
Insert the bare wire through the hole. Make
sure
the wire does not
touch any
other terminals.
4. Release the push terminal to
secure
the wire.
5. Repeat these
steps
for the
other
terminal.
Note:
The speaker
includes
three
channels and can either
use three
sets of
two
conductors or
a
six-conductor
cable.
4
Connect speaker wires
to the terminals on the
sound bar
l Strip about 3/8 in (10 mm) of insulation from each speaker wire.
2. Push down on the top of the terminal to expose the hole in the post.
3. Insert the bare wire through the hole. Make sure the wire does not
touch any other terminals.
4. Release the push terminal to secure the wire.
5. Repeat these steps for the other terminal.
Note:
The speaker includes three channels and can either use three
sets of two conductors or a six-conductor cable.
4
Advertisement
Need help?
Do you have a question about the MYTHOS 3C-65 and is the answer not in the manual?
Questions and answers