Download Print this page
Laser EPS-PBTW User Manual

Laser EPS-PBTW User Manual

Tws earbuds with powerbank charging case

Advertisement

Quick Links

TWS Earbuds with Powerbank Charging Case
WHAT'S IN THE BOX:
• TWS earbuds
• Earbuds case with powerbank
OVERVIEW
Remaining battery
capacity level
CHARGING
• Fully charge the earbuds and the case before first use with the supplied cable. The charging case
display indicates the battery level. The last digit will flash while charging. We recommend using a
standard 5V USB wall charger, laptop or PC.
• Insert earbuds snugly into the case charging slots - magnets will pull them into place. The earbud
LED stays red during charging, then turns off when complete.
• Earbuds will sound an alert when the battery is low.
• Connect the included cable or your own to the USB-A port for charging other devices.
SETTING UP
1. Take the earbuds out of the case; they will power on and sync with each other. Place them in your
ears.
2. On your connecting device, go to Settings, turn on Bluetooth and search for nearby devices.
3. Select EPS-PBTW to pair with the your device. The earbuds will confirm the connection with a
voice prompt. From now on, any audio played on your device will be transmitted through the TWS
earbuds.
NOTE:
• If EPS-PBTW does not appear on the connecting device, retry from step 2.
• Your earbuds auto-turn off after 5 minutes of no connection. Place them in the charging case
and restart from step 1 if needed.
• The earbuds can be paired with multiple devices, but can only play music from 1 paired device
at a time.
User Manual
EPS-PBTW
Touch-control area
• USB-A to USB-C charging cable
• User manual
USB-C port
(for charging powerbank)
USB-A port
(for charging other devices)

Advertisement

loading
Need help?

Need help?

Do you have a question about the EPS-PBTW and is the answer not in the manual?

Questions and answers

Shahram
March 17, 2025

Subject: Issue with EPS-PBTWB-078 Earbuds Dear Laser Customer Service, I purchased a pair of EPS-PBTWB-078 earbuds from Big W Eastland Ringwood about two months ago. Unfortunately, I have recently encountered some issues: The right earbud is not working at all, even after a full charge. The left earbud has extremely low volume. Could you please advise me on how to resolve this issue? Do you have any troubleshooting steps, or would a replacement be necessary? Looking forward to your guidance. Best regards,

User image 67d7f8ffcf1ba
1 comments:
Mr. Anderson
March 17, 2025

For a non-working right earbud and low volume in the left earbud, follow these troubleshooting steps:

1. Ensure Both Earbuds Are Charged – Place both earbuds in the charging case and let them charge fully.
2. Reset Synchronization – Put both earbuds back in the charging case, then take them out and wait for them to sync. If not synchronized, both earbuds will flash red and white; when synced, only one earbud will flash.
3. Check Bluetooth Connection – Ensure Bluetooth is enabled on your device and no other device is connected to the earbuds.
4. Stay Within Range – Keep the earbuds within 10 meters of the connected device.
5. Clean the Earbuds – Check for debris or earwax blocking the sound output and clean gently with a dry cloth.

If the issue persists, consider resetting and re-pairing the earbuds from the beginning.

This answer is automatically generated

Summary of Contents for Laser EPS-PBTW

  • Page 1 2. On your connecting device, go to Settings, turn on Bluetooth and search for nearby devices. 3. Select EPS-PBTW to pair with the your device. The earbuds will confirm the connection with a voice prompt. From now on, any audio played on your device will be transmitted through the TWS earbuds.
  • Page 2 User Manual FUNCTION OPERATION TWS Earbuds with Wireless Charging Case Power on Press and hold (approx. 3 sec.) until the earbud powers on. EPS-CSWLC-306 Power off Press and hold (approx. 5 sec.) until the earbud powers off. Play/pause Tap once. Volume up Tap 3 times on the Right earbud.

This manual is also suitable for:

Pbtww-085Pbtwb-078