Advertisement
Quick Links
Guarantee
Distributed by The Tool Connection Ltd
If this product fails through faulty materials or workmanship, contact our
Kineton Road, Southam, Warwickshire CV47 0DR
service department direct on: +44 (0) 1926 818186. Normal wear and tear
T +44 (0) 1926 815000 F +44 (0) 1926 815888
are excluded as are consumable items and abuse.
info@toolconnection.co.uk www.toolconnection.co.uk
Intelligent Battery Charger
4 in 1
Instructions
For all 12 volt automotive battery types: lead-acid, AGM (absorbed glass mat) Gel
and deep cycle.
This charger initiates an 8-stage charging cycle which charges and maintains
the battery. Additionally there is a boost mode for battery rescue, and a steady
12v supply mode. The charger can also be used to test the battery without
connecting to a 240v AC supply. It features overload, short circuit and polarity
reversal protection.
Includes a 'snow' mode for charging in temperatures below 0ºC
Note: this is for AGM absorbed glass mat batteries only - never attempt to charge
a battery with frozen electrolyte.
The charger is supplied with three methods of connection:
Insulated battery clamps.
Eyelet connectors for motorcycles.
Onboard 12v connector.
www.lasertools.co.uk
5475
Advertisement
Summary of Contents for Laser 5475
- Page 1 5475 Intelligent Battery Charger 4 in 1 Instructions For all 12 volt automotive battery types: lead-acid, AGM (absorbed glass mat) Gel and deep cycle. This charger initiates an 8-stage charging cycle which charges and maintains the battery. Additionally there is a boost mode for battery rescue, and a steady 12v supply mode.
- Page 2 The 8-stage Charging Works as Follows LED status Charging Mode Normal Mode: Normal LED on. (Yellow LED) Snow Mode: Cold LED on. (Yellow LED) 1. Soft Start: Tests if the battery can accept charge; charging will commence if battery is okay.
- Page 3 Specifications Cars and Light Commercials Charger Mode button: 1. Identify the polarity of the battery terminals Press this button to cycle between ‘Normal’, ‘Snow’ and ‘DC Supply’ modes. (LED will (if not clearly indicated, the positive terminal illuminate indicating mode selected.) or post is normally larger than the negative).
- Page 4 A LED’s Operation B Charger Mode Button C Charger Current Button Connect charger to battery as described in this instruction manual. D To Battery E To 240v AC Supply Normal Charger Mode: • Select this mode with the ‘Charger Mode’ button. Normal Mode LED will illuminate. •...