Page 2
Products Details 1. USB Power Strip 2. USB Charge & Sync Box 3. On/Off Button & Sync Port...
Page 3
Instruction (Charging) 1. Open the rear door and connect one end of the USB charging cable to the USB power strip of the back panel 2. Through the hole of the back panel, extend the USB charging cable into the front compartment charging area.
Page 4
3. Open the front door and wrap the charging cable around the plastic baffle cable tray; 4. Connect the device that needs to be charged, turn on the power, and start charging.
Page 5
Instruction (Synchronization) 1. The wiring of the device’s back panel is shown as below. Please use Port 1 for the connection with computer to synchronize devices. A software for synchronization management is also provide, which can be downloaded from our website. 2.
Specification 1. Adopt the latest smart charging simulation mode to automatically identify all mainstream USB charging devices to ensure fast charging. The built-in three charging simulation profiles correspond to the three major charging protocols: BC1.2 DCP charging protocol, Apple charging protocol, Samsung TAB charging protocol.