thomann CTG-10 Quick Start Manual

CTG-10 Clip Tuner CTG-10 Clip Tuner
Safety instructions
Intended use
This device is used for the tuning of string instruments. Any other use or use under
other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damage resulting from
improper use. This device may be used only by persons with sufficient physical, sen-
sory, and intellectual abilities and having corresponding knowledge and experience.
Other persons may use this device only if they are supervised or instructed by a per-
son who is responsible for their safety.
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children
can injure themselves when handling the device. Never allow children to
play with the packaging material and the device. Always store packaging
material out of the reach of babies and small children. Always dispose of
packaging material properly when it is not in use. Never allow children to
use the device without supervision. Keep small parts away from children
and make sure that the device does not shed any small parts (such as
knobs) that children could play with.
Risk of fire due to incorrect polarity!
Incorrectly inserted batteries may cause fires and destroy the device and
the batteries. Observe the markings on the batteries and on the device.
Ensure that proper polarity is observed when inserting batteries.
Features
• Chromatic tuner for guitar and bass
• Tuning via vibration sensor
• Large illuminated display
Inserting the battery
Risk of fire due to incorrect polarity!
Incorrectly inserted batteries may cause fires and destroy the device and
the batteries. Observe the markings on the batteries and on the device.
Ensure that proper polarity is observed when inserting batteries.
Possible damage due to leaking batteries!
Batteries can leak and cause permanent damage to the device. Remove
the batteries from the device if it is not going to be used for an extended
period of time.
Controls and functions
1 On/off switch & "mood" toggle switch
2 Display
a - Note name (chromatic, guitar, bass)
b - String number (guitar, bass)
c - Mood
d - Measuring range
3 Clip
4 Battery compartment
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
Quick start guide
This document contains important information on the safe use of the product.
Read and follow the safety instructions and all other instructions. Keep the docu-
ment for future reference. If you pass the product on to others, please include this
document. Contents are subject to change. Please refer to the latest version of the
documentation, which is available for download at www.thomann.de.
Possible damage due to leaking batteries!
Batteries can leak and cause permanent damage to the device. Remove
the batteries from the device if it is not going to be used for an extended
period of time.
Operating location
Do not ever use this product:
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty places
• in locations where the device may get wet
• in the vicinity of magnetic fields
General handling
• To prevent damage, never exert force while operating the device.
• Never immerse the device in water. Wipe only with a clean and dry cloth. Do not
use liquid cleaners such as benzene, thinners or flammable cleaning agents
• Not suitable for guitars with nitro lacquer or shellac. If left on instruments with
a polyester finish, the lack of light irradiation at the mounting point can cause
light-related discolouration on the instrument.
Keep the device away from impurities!
Keep the device away from containers with liquid. Should liquid enter the device,
this could lead to its destruction or fire. Ensure that no metallic parts enter the
device.
• Colour change to display the correct mood
• Can be rotated 360 degrees
• Battery included (CR2032)
1. Press on the battery compartment cover as shown on the back of the device.
2. Open the compartment and insert a new CR2032 battery while paying atten-
tion to the polarity. The battery life depends on the operating conditions.
3. If the device doesn't work as described in this manual and if switching off and
on doesn't solve the problem, remove the battery and reinsert it again to solve
the problem.
EN
DocID: 123456_23.10.2023