thomann CTG-10 Quick Start Manual

CTG-10 Clip Tuner
Safety instructions
Intended use
This device is used for the tuning of musical instruments. Any other use or use under
other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damage resulting from
improper use.
This device may be used only by persons with sufficient physical, sensory, and intel-
lectual abilities and the necessary knowledge and experience. Other persons may use
this device only if they are supervised or instructed by a person who is responsible
for their safety.
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can
injure themselves when handling the device. Never allow children to play
with the packaging material and the device. Always store packaging mate-
rial out of the reach of babies and small children. Always dispose of pack-
aging material properly when it is not in use. Never allow children to use
the device without supervision. Keep small parts away from children and
make sure that the device does not shed any small parts (such as knobs)
that children could play with.
Risk of fire due to incorrect polarity!
Incorrectly inserted batteries may cause fires and destroy the device and
the batteries. Observe the markings on the batteries and on the device.
Ensure that proper polarity is observed when inserting batteries.
Possible damage due to leaking batteries!
Batteries can leak and cause permanent damage to the device. Remove
the batteries from the device if it is not going to be used for an extended
period of time.
Interference with neighbouring electrical receivers due to electromag-
netic field!
The device emits an electromagnetic field during operation. Using the de-
vice near receiver devices (e.g. radios or TV sets) may cause interference. If
the device interferes with neighbouring receivers during operation, in-
crease the distance between the device and the receivers with interfer-
ence.
Features
• Chromatic tuner for guitar and bass
• Tuning via vibration sensor
• Large illuminated display
Inserting the battery
Risk of fire due to incorrect polarity!
Incorrectly inserted batteries may cause fires and destroy the device and
the batteries. Observe the markings on the batteries and on the device.
Ensure that proper polarity is observed when inserting batteries.
Possible damage due to leaking batteries!
Batteries can leak and cause permanent damage to the device. Remove
the batteries from the device if it is not going to be used for an extended
period of time.
Connections and controls
Quick start guide
This document contains important information on the safe use of the product.
Read and follow the safety instructions and all other instructions. Keep the docu-
ment for future reference. If you pass the product on to others, please include this
document.
Contents are subject to change. Please refer to the latest version of the documenta-
tion, which is available for download at www.thomann.de.
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient condi-
tions. Only operate the device indoors within the ambient conditions
specified in the "Technical specifications". Avoid operating it in environ-
ments with direct sunlight, heavy dirt and strong vibrations. Avoid operat-
ing it in environments with strong temperature fluctuations. If tempera-
ture fluctuations cannot be avoided (for example after transport in low
outside temperatures), do not switch on the device immediately. Never
subject the device to liquids or moisture. Never move the device to anoth-
er location while it is in operation. In environments with increased dirt
levels (for example due to dust, smoke, nicotine or mist): Have the device
cleaned by qualified specialists at regular intervals to prevent damage due
to overheating and other malfunctions.
General handling
• To prevent damage, never exert force while operating the device.
• Never immerse the device in water. Wipe only with a clean and dry cloth. Do not
use liquid cleaners such as benzene, thinners or flammable cleaning agents
• Not suitable for guitars with nitro lacquer or shellac. If left on instruments with
a polyester finish, the lack of light irradiation at the mounting point can cause
light-related discolouration on the instrument.
Keep foreign substances away from the device!
Keep the device away containers with liquid. Should liquid enter the device, this
could lead to its destruction or fire. Ensure that no metallic parts enter the device.
• Colour change to display the correct tuning
• Can be rotated 360 degrees
• Battery included (CR2032)
1. Press the unlocking button on the back of the device.
2. Press on the battery compartment cover and slide it open as shown on the
back of the device.
3. Insert a new CR2032 battery. Ensure that proper polarity is observed when
inserting battery. The battery life depends on the operating conditions.
4. If the device doesn't work as described in this manual and if switching off and
on doesn't solve the problem, remove the battery and reinsert it again to solve
the problem.
1
| Main switch. Turns the device on and off. "Tuning" switch
2 Display
a - Note name (chromatic, guitar, bass)
b - String number (guitar, bass)
c - Tuning
d - Measuring range
3 Clip
4 Battery compartment
5 Unlocking button
EN