D-Link DCS-F4805E Getting Started Manual

Getting Started Guide for
D-Link Vigilance Network Camera
PRODUCT QUICK INSTALLATION GUIDE
DCS-F4605EK / F4805E /
F4805E-BLK / F4808E
PoE Network Cameras
STEP 1.
Connect the camera to a PoE switch.
If you do not have a PoE switch, power the camera
with a 12V DC power supply (not included).
If you have a Network Video Recorder (NVR), connect
the camera to your NVR and follow the instructions
for your NVR.
STEP 2.
Log into your camera by typing its IP address into
a Web browser.
The camera's default setting is to obtain IP address
automatically (DHCP). If DHCP server is not present
the camera will use 192.168.0.120 address.
You can find out what IP address was assigned to
the camera by checking your router's DHCP status or
by running the Tool for Cameras and NVR software
(downloadable from D-Link Web site).
STEP 3.
The default username is "admin" and password is
"admin".
It is recommended to change the default password to
a strong password that includes lower and upper case
letters, numbers and special symbols.
Enter username:
Enter password:
STEP 4. (Optional)
Add your camera to D-Link CCTV app.
Add your camera to DCMS+ Surveillance
Software (free download):
https://files.dlink.com.au/Products/DCMS+/
Add your camera to your NVR.
Please follow your NVR's setup guide.
Factory Reset
If you forgot the camera password or need to revert
the camera to its factory settings:
Open the camera's cover and press the Reset Button
for 5 or more seconds:
Reset Button
QUICK INSTALLATION GUIDE | DCS-F4605EK / F4805E / F4805E-BLK / F4808E