Table of Contents
Advertisement
OMRON
If Windows has not been used before, spending some time working with the Microsoft
documentation is recommended before using CX-Supervisor.
This introductory chapter deals with several important aspects of installing CX-Supervisor and setting
it up for use. It is recommended that this entire chapter be read before installing the software.
System Requirements
CX-Supervisor operates on the following hardware and operating systems:
Hardware Requirements
The following configuration is the minimum system requirements for running CX-Supervisor:
♦
IBM PC compatible 600 MHz Pentium II processor or better.
♦
256Mbyte of RAM minimum.
♦
650Mbyte available hard disk space.
♦
1024 x 768 XGA display.
♦
A CD ROM drive is required in order to install the CX-Supervisor software.
Note:
These are requirements when using minimum operating system. For other operating
systems consult your documentation.
The following configuration is the recommended minimum system environment for running CX-
Supervisor effectively:
♦
IBM PC compatible Pentium II 1.0 GHz processor.
♦
512Mbyte of RAM.
♦
650Mbyte available hard disk space.
♦
1024 x 768 XGA display.
Operating Systems and Environments
The operating systems on which this software should be run are:
♦
Microsoft Windows 2000 (SP2)
♦
Microsoft Windows XP Professional
Note:
This product does not install or run on Windows NT, Windows ME, Windows98 or
Windows 95.
Note:
CX-Supervisor is not guaranteed to be compatible with computers running Windows
emulation (e.g. Apple Macintosh or VMWare).
Revision 2.0
Getting Started with CX-Supervisor
Page 3
Advertisement
Table of Contents
